Blade Fusion 550 Quick Build Electric Helicopter Kit
Blade Fusion 550 Quick Build Electric Helicopter Super Combo. Based on the extremely popular Fusion 480 and stretch kit with improved and updated features for a perfect fusion of convenience and performance! With a quick build setup with factory-finished assemblies so it can be ready to fly in less than half the time of typical kits! The Fusion 550 features a lightweight, yet extremely stiff and durable carbon fiber and aluminum frame, a high-strength steel 10mm main shaft and 8mm spindle with metal head components, efficient helical main gear paired with a steel pinion for quiet and reliable performance, a 4320-1180Kv brushless Outrunner motor that delivers incredible torque and power, an oversized 25mm diameter tail boom that eliminates the need for boom support, a 6mm wide belt for the driven tail with adjustable tension, a carbon fiber and aluminum tail case with a metal tail drive pulley, exclusive Optimized Servo Geometry for precise and responsive control and a high-strength steel 5mm tail shaft paired with a metal bell crank and grips! It is safe to say that this Fusion 550 is one of the most advanced and convenient kits on the market with all-around performance capabilities!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
- Based on the extremely popular Fusion 480 and stretch kit for a perfect fusion of convenience and performance
- Quick Build Kit with factory-finished assemblies so it can be ready to fly in less than half the time of typical kits
- Includes the longer boom, belt, plus carbon fiber 550mm main rotor and 95mm tail rotor blades
- Lightweight yet extremely stiff and durable carbon fiber and aluminum airframe design
- High-strength steel 10mm main shaft and 8mm spindle with metal head components
- Efficient helical main gear paired with a steel pinion for quiet and reliable performance
- Includes a 4320-1180Kv brushless Outrunner motor that delivers incredible torque and power
- Compatible with popular and common 6S 4000–5000mAh 30+C LiPo batteries
- Oversized 25mm diameter tail boom eliminates the need for boom supports
- 6mm wide belt for the driven tail featuring adjustable tension
- High-strength steel 5mm tail shaft paired with a metal bell crank and grips
- Carbon fiber and aluminum tail case with a metal tail drive pulley
- 5mm diameter carbon fiber tail pushrod for precise tail control
- Fits standard-sized servos for cyclic and tail control
- Exclusive Optimized Servo Geometry for Precise and responsive control
- The Combo version (BLH4975SC) includes top-of-the-line Spektrum components!
Specifications:
- Completion level: Un-Assembled Kit
- Skill Level: Level 3
- Power Type: Electric
- Swashplate Type: 120 Degree CCPM
- Tail Drive: Belt Drive
- Length: 42.52" (1080mm)
- Width: 7.4" (188mm)
- Height: 12.59" (320mm)
- Main Rotor Blade Length: 21.65" (550mm)
- Tail Rotor Blade Length: 3.74" (95mm
- Main Rotor Diameter: 49.01" (1245mm)
- Tail Rotor Diameter: 9.84" (250mm)
- Weight: 6.72Lb (3050g) with Recommended Battery
- Gear Ratio: 9.33
- Pinion Size: 12T
- Motor Type/Size: Brushless 4320-1180Kv 10-Pole
- Main Rotor Head Type: Collective Pitch Flybarless
Includes:
- (1) Blade Fusion 550 Helicopter Quick Build Kit
- (1) Spektrum Avian 4320-1180Kv 10-Pole Brushless Outrunner Motor
- (1) Blade 550mm Carbon Fiber Main Rotor Blade Set
- (1) Blade 95mm Carbon Fiber Tail Rotor Blade Set
- (1) Fusion 550 Helicopter Product Manual
Needed to Complete:
- (1) Flybarless control system with built-in and/or external receiver
- (1) Full-range 6+ channel helicopter compatible transmitter
- (3) High-torque standard sized cyclic servos
- (1) High-speed standard sized tail servo
- (1) 130+ amp 6S and helicopter compatible ESC
- (1) 6S 22.2V 4000–5000mAh 30+C LiPo battery
- (1) Compatible LiPo Charger
This product was added to our catalog on October 6, 2023
