Axial SCX10 III with Jeep JT Gladiator Body & Portal Axles
The Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler with Portal Axles incorporates the key components that have made the Axial SCX10 series successful - but takes realism and detail to a higher level. The SCX10 III includes a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, just like a 1:1 vehicle. Sitting on top of AR45 portal axles and powered by a Firma 40A ESC, the Axial SCX10 III is ready to hit the trail.
Out of the box, the SCX10 III Jeep JT Gladiator transmission offers a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Though locked out from the factory, you can set up the vehicle to have a 40% faster second gear instead of DIG — or add a second micro servo and use an optional radio with at least four channels to have both the DIG and two-speed functions.
Features:
- Replica V8 engine cover, transmission housing and transfer case cover and protect the motor while improving scale appearance and adding forward-mounted weight.
- AR45 Portal Axles feature an offset front housing for realistic looks.
- Axle housings also use portal gears for increased ground clearance and a universal that provides 45 degrees of steering.
- Differential locker features Hypoid gears, allowing for smaller size gears, improved gear reduction and reduced torque twist.
- Centered battery position improves chassis balance with front-mounted motor.
- Hard anodized oil-filled shocks feature shock cap with bleed screw for easier rebuilds.
- Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most "slop".
- Extended 13.9 inch wheelbase with longer frame rails and chassis supports a more realistic version of the Jeep JT Gladiator body.
Specifications:
Scale: 1/10
Length: 22.25in (565 mm)
Width: 9.25in (235 mm)
Height: 9.5in (241 mm)
Ground Clearance: 3in (76.2mm)
Wheelbase: 13.9in (353 mm)
Weight: 7lbs (3175g)
Drivetrain: 4WD
Gear Pitch: 32-Pitch
Pinion: 14T
Spur Gear: 40T
Final Drive Ratio: 45.6:1 Low / 31.3:1 High
Max Battery Dimensions: 5.45x1.83x1.38in (138.5x46.5x35mm)
Completion Level: Ready-To-Run
Includes:
- (1) Axial SCX10 III Jeep JT Gladiator 4WD with:
- (1) Spektrum Firma Smart 40A ESC/Receiver (installed)
- (1) Spektrum 15kg Servo (installed)
- (1) Spektrum DX3 DSMR Radio
- (1) Product Manual
Needed to Complete:
- Vehicle Battery (accepts standard and shorty packs)
- Compatible charger
This product was added to our catalog on January 19, 2023