Western Robotics Tail Servo Step-Down Voltage Regulator w/LED Indicator

This is the Western Robotics Tail Servo Step-Down Voltage Regulator. The Tail Servo Step-Down Voltage Regulator is ideally designed to step-down a voltage source of 6 volts that is outputted from any external BEC (battery eliminator circuit) down to 5.2 volts. This allows an external 6 volt BEC to be used with Futaba 9241, 9251, 9253, 9254, 9255, and 9256 servo models, as well as other digital servos that are not capable of handling 6 volts. The Tail Servo Step-Down Voltage is equipped with male/female servo plugs and is ideally used in series with the RC models gyro and rudder servo to prevent any harmful damage overloading the servo. The Tail Servo Step-Down Voltage can also be used with any other applications that require a step down power voltage of approximately 0.8 volts.

Features:

• Ultra compact step-down voltage regulator cable to reduce 6V source to a safe 5.2V to the rudder servo.
• LED Indicator
  
• High power component to withstand current of up to 5 Amps continuous 10 Amps peak at 50V.
• Prevents harmful damage and overloading to the digital rudder/tail servo.
• Easy installation.

Specifications:
Height: 4mm
Width: 8mm
Length: 12mm
Weight: 4 grams 

This product was added to our catalog on January 3, 2011