The Vader Axial Capra Skid is cut from solid 1/4" thick delrin stock and adds aluminum link riser plates for incredible strength. The design of this skid allows the use of a full size dig servo! The design allows space for a low profile servo using the included 3D printed servo mounts alone, or a standard size servo using the included spacers under the servo - and you can still use the stock interior. Additionally the design also allows use of a micro size servo when the included adapter plate is used. Compatible with stock Axial and Revo rod ends, this American made upgrade carries a manufacturer's lifetime guarantee, and includes all necessary hardware for installation.
NOTE: See photos above for installation notes.
This product was added to our catalog on April 28, 2021
The delrin middle section is nice and that is very well done, but the praise ends there sadly! The aluminum riser side plates are extremely soft material and the holes do not line up well with anything else. The countersinks on the sides were not completed and left the flat head screws protruding thus requiring work to get them to fit correct and flush. The 3D printed portions leave a lot to be desired. Additionally my kit included the wrong hardware (all 3x10mm no 3x6mm).
Overall poor and would not recommend.