This is a Tekno RC 2.4mm Sway Bar, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. The EB48 buggy uses the same length sway bars, allowing you to use the same sway bar on the front or rear of the car. This sway bar is the stock 2.4mm rear sway bar, and is stiffer than the stock 2.3mm front sway bar.
Effects of Front Roll Bar Adjustment
Stiffness |
Characteristic |
Softer |
- Increased Front Chassis Roll
- Increased Front Traction
- Decreased Rear Traction
- Increases Off Power Steering (May Cause Oversteer)
|
Stiffer |
- Decreased Front Chassis Roll
- Decreased Front Traction
- Decreased Off Power Steering at Corner Entry (Increases Understeer)
- Quicker Steering Response
|
Effects of Rear Roll Bar Adjustment
Stiffness |
Characteristic |
Softer |
- Increased Rear Chassis Roll
- Increased Rear Traction
- Decreased Front Traction
- Decreases On Power Steering (May Cause Understeer)
|
Stiffer |
- Decreased Rear Chassis Roll
- Decreased Rear Traction
- Increased On Power Steering (May Cause Oversteer)
- Quicker Steering Response in High Speed Chicanes
|
This product was added to our catalog on August 13, 2012