It's a great motor, perfect for the Losi TEN-SCTE . Make sure you pick up the RX8 with it too. If your having trouble finding the perfect gears for this motor. Im referring to the pinions to use, go to the tekin website(www.teamtekin.com) and you will see a variety of settups that team tekin racers are using on their r.c trucks and buggies. If you help leave a email and I will post the link to where the settups are located.
Cant believe the speed this motor produces, on 2 cell batteries with an RX8 and a 15t pinion its faster than my old set up was on 3s which was a castle MMP and a 4 pole 550 2800 kv with a 17t pinion, I have to gear down to either a 13t or 14t on the track, otherwise its overkill. Temps on 15t 165ish 14t 145 13t around 130. I set my current limiter at 75
Awesome motor. My Ten SCT-E runs faster and 20 degrees cooler than my Novak 4.5 with the high torque rotor. This motor is worth every penny. TQing all day. Using a RX8 and it is buttery smooth too.
Amazing little motor! I have this in my ET410 and for the larger outdoor dirt track I run it at, its perfect! I can keep up with the 8th scale (as long as I don't get ran over, LOL).
This is by far my motor of choice for my 4wd short course truck. It has so much power and is nice and light. It always runs strong and cool.
This motor is a work horse. Throws my scte around like nothing. Triples on call. Just watch heat may need to run no timing at all. No worries still a beast.
I have this motor and the 550 Pro4HD 4300 Tekin motor. I run at IERC raceway with my SCTE 2.0 with 15T pinion and 40T spur. This motor is super strong and works good on tight courses. I think the 550 hits a little bit harder coming out of the turns. You deff. can't go wrong with either motor. I prefer to run the 540 over the 550 based on the current track set up (smaller jumps, not very high speed).
great motor. I run it in my scte and its got more power than you need
This motor is smooth and fast! Definitely a great purchase!!
The motor has power for days in my SCT410SL. Even when geared "funky" it eats it like nothing barely heating up. I'm starting to push it and have been happy with this motor paired with a Tekin RX8 Gen3 ESC.
Amazing fast motor!!! Will strongly recommend this product!!!
I put this motor in my Slash 4x4. Bye Bye competition. Made my slash come alive. Stock slash's have no chance. Motor runs smooth and cool.
Very smooth power band. I use it in my Tekno SCT410.3
This motor is a beast it has my SCT flying. Plenty power and rpm smooth with cool temps I like it alot
Verry good motor for my SCTE 2.0, temps 130-140f use pinion gear 15t
Super sweet motor! Run it in my SC10 4x4 with LRP ESC and Orion 5500 2 cell LiPo. This motor runs cooler than my LRP motor did. Great motor! No complaints.
i also run 4600 with rx8 im 6 months into rc racing went from using slash 4x4 ultimate to my current rx8pro 4 pole 4600 losi scte and im currently 10 points ahead of second i went from cmains to amains in a very short period and i attest this to my scte and tekin powerplant anyone who tells you you can get better for cheaper is off there rocker imo nothing compares thats why my tlr22sct has rspro / gen2 6.5 redline and same set for my b44.1 you wanna win use tekin
I have this and the 3300kv motor, really really smooth with a lot of couple.
I really love this motors series.
Yes it's that good with rx8 $$$ makes my losi scte fly on the track no problem making huge jumps with no speed! Put a 90 c battery on it and power is all the way to low voltage! Even used Eco power battery's 30c on it and still flys just starts to lose that punch at the end due to battery, not motor.
Running this in my SC10 4x4 FT. I agree w/ Dakota, this motor is vicious. I need practically no running start to clear triples at my local track.
