Team Integy 1/8 Universal Setup Station w/Bag

First off, I have used setup stations in the past with consistent results, this one looks good but the gunmetal color blends with the white lettering and is difficult to read in Low light conditions ( black lettering would be more defined) There is a slight bit of slack in the bearings that mount the plates to the hubs but with a little compensation (1/2 degree ) accurate camber readings can be achieved . the toe plate was a bit too tight where it bolts Together on one side but a little carving of the anodized out of the holes with a exacto blade it assembled without further problems and worked as it should .im not impressed with the castor pointers as you have to guess and eyeball the groove inline with the kingpin angle to achieve a reading but most manufacturers have a set castor number anyway adjusted by changing spacers or uprights, all in all price comparison to top end stations 300$ v/s 100$ you can have the same setup results with the integy