Champion-Level 1:10 Electric R/C Buggy (Carpet Version)
Based on the proven and popular IFMAR World Champion, European Champion, Australian Champion and British Champion B74 platform that has been successfully competing at the highest level worldwide! Team Associated decided to go ahead and elevate the B74 platform performance even further with the addition of Factory Team upgrades and setups to keep the RC10B74 on top of the completion! the B74.2 and B74.2D Champions Edition kits are here to rule the 1/10 scale 4WD buggy scene!
About The RC10B74.2 Champion Edition
Key Features From Its Proven Predecessor
This RC10B74.2 Champions Edition retains all the great key features from its predecessor. The B74.2 is equipped with front and rear molded gearboxes that lower the center of gravity by reducing the weight from high points of the car. Also fitted on this B74.2 are the smooth 13mm aluminum big bore shocks that offer supreme jump and bump handling performance, the gull wing front suspension arms and the LTC differential gear sets that make it easier and more predictable to drive on any track or condition.
Smooth Handling and Drive Feel
When it comes to handling and drive feel, the RC10B74.2 Champions Edition features a 2-Pad high-load, high-capacity center slipper clutch with LCF pad material that provides a smoother drive feel and better overall control, LTC differential gear sets that reduce binding under power for more predictable power delivery, a +3mm aluminum steering rack for optimized bump steer at low ride heights, larger 3.5mm turnbuckles with updated rod end style ball cups to increase durability and reduce suspension binding and RC10B6-style inserts that offer 0, +1, +2, and +3mm differential height options!
Factory Team Upgrades and Setup
To take the RC10B74.2 Champions Edition a level higher above the competition, Team Associated Factory Team took the B74.2 to the lab, and after countless hours of testing and tuning, Factory Team determined to use the optional Factory Team decoupled slipper clutch set, Factory Team +2 steering block arms and update the kit setup to include 2.5mm thick shock pistons and purple front springs which resulted in an even better control and stability while cornering at higher speeds and hitting or landing from jumps!
Features:
- Factory Team decoupled slipper clutch
- Factory Team +2 steering block arms
- Updated 2.5mm thick shock pistons and purple front springs
- Lightweight molded gearboxes with an LCG design
- Gull wing front suspension arms and mating shock tower
- Larger 3.5mm turnbuckles with updated rod end style ball cups
- -2mm wing mounts for use with slicks and low-profile carpet tires
- 2-Pad high-load, high-capacity center slipper clutch with LCF pad material
- +3mm Aluminum steering rack
- 66mm Rear CVA drive shafts and axles
Includes:
- (1) RC10B74.2 Champion Edition 1/10 4WD Buggy Kit
- (1) Manual
Needed To Complete:
- Electronic speed control
- 1:10 scale electric motor
- Steering servo
- 2-channel Transmitter/Receiver system
- (7.4V-7.6V) 2S “Shorty” LiPo battery
- Compatible battery charger
- 1:10 scale off-road buggy wheels and tires
- Lexan-spray paint for body
- Assembly Tools such as Body Scissors, Reamer, Hobby Knife, Needle Nose Pliers, Shock Shaft Pliers Wire Cutters, Soldering Iron and Calipers
Specifications:
| Scale |
1:10 |
| Length |
395mm (15.55") |
| Width |
Varies* |
| Wheelbase |
280.5-285.5mm (11.0-11.24”) |
| Weight |
885g (1.95lbs) |
| Internal Gear Ratio |
2.50:1 |
| Power Source |
Electric |
| Input Voltage |
(7.4V-7.6V) 2S LiPo |
| Assembly Level |
Unassembled Kit |
*NOTE: RC Kits are unassembled Remote Control Models that require assembly, racer selected electronics, and other racer provided items. Photos of the assembled kit are for illustrative purposes only. For a complete list of needed items to drive this kit please see the list above.
