SSD RC Double Bent Titanium Steering/Panhard Links (D60, SCX10, SCX10 II)

Perfect! Just what I needed for my scx10 ii custom build! Steering geometry is on point with very little adjustment. Great quality, looks very nice and the bends were perfect for clearance. I will be using these on my next build.

This panhard and drag link set helped with binding and made more clearance under full stroke for my HPI Venture. I did use some 2mm spacers to extend them a tad but alignment is spot on under resting weight (semi droop).

The install can be a little tricky on these to get the right fit but is overall pretty easy. So far they have held up really well on the trails. They give a bit more clearance over the front pumpkin and have improved the steering response over the stock trail honcho links.

Measured out perfectly using Short Rod Ends to make a 89mm eye-to-eye panhard link for my SCX10 II belly crawler custom build. HOWEVER, failure occurred on my third run with this assembly. The holes of the supplied plastic Short Rod Ends are very shallow; so, the 3x12mm Threaded Rods doesn't thread into them very far. About 7mm of the Threaded Rod goes into the Titanium Link while only 5mm goes into the plastic Rod End side. An overall longer length assembly using the Long Rods Ends may be more durable; but, will not fill my needs...So, giving this product a single star rating.