The Serpent SRX8 "Cobra" 1/8 Buggy was developed for performance. Billy Easton has taken the Cobra platform to the next level. With a host of innovative features and the highest quality components, the SRX8 Cobra is ready for battle. As always, the car was built for performance, but ease of use and durability were of the utmost importance as well.
NOTE: Engine/pipe, electronics, wheels/tires and painted body shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
Features:
- Stunning Standard Equipment:
- Chassis is hard coated 7075 T6, laser engraved
- Steering blocks aluminum 7075 T6, black coated, laser engraved
- C-hubs 15°, aluminum 7075 T6, black coated, laser engraved
- Rear uprights, aluminum 7075 T6, grey coated, laser engraved
- 4.5mm carbon fiber shock towers front and rear
- Big-bore shocks with machined pistons and spacers, with super smooth x-rings
- Hard coated engraved shock caps, 3.5mm rods and rubber sleeves
- Front, central and rear gear differentials
- 4-shoe racing clutch
- Durable wishbones ready for use with inserts (molded standard, carbon optional)
- Steel disk brake system with special pre-mounted brake-pads
- Coated steel integrated chassis skid plate in the rear
- Lightweight and strong hard coated aluminum camber and track rods
- Straight rear wing and SRX8 Avenger style body
- Spring steel drive-train system with CVD and rubber protections boots
- Ball raced anti-roll bars front and rear with pivot system
- Super nice radio box layout and fully integrated transponder holder
- Decals for the radio box caps
- Top quality sealed bearings with grease
- Cool Innovations:
- The redesigned Gear-differentials have larger cases to allow for more oil inside, and have a build in pressure compensating system. Both will create a more consistent diff over the longer runs
- Wishbones allow mounting inserts both in the top and in the bottom of the wishbones, which allows for many possible options to work with more or less flex, using no inserts, molded inserts, carbon inserts, or mixed inserts
- Angled steering system for optimal Ackermann and reduced bump steer
- Performance Packed:
- Fully adjustable for caster, camber, toe-in, toe-out, roll-center, ride height, wheelbase, down stops, anti squat, king pin angle, and Ackermann
- Updated geometry front and rear combined with redesigned chassis shape and longer chassis braces for more agile handling, more steering, more rear grip and improved balance
- Angled steering system for optimal Ackermann, responsive steering and reduced bump steer
- Hard coated shocks with redesigned internals
- Race clutch with 4-carbon shoe system
- Effective air filter system with redesigned angled rubber connector and strong wire holder
- Redesigned areo pack with wider Avenger body and updated straight wing for medium downforce
- Made to Last:
- Hard coated chassis with rear chassis skid plate
- Spring steel transmission parts and wheel axles
- Aluminum steering blocks, C-hubs
- Dust boots for shocks and all transmission parts
- Rear body mount with rubber damped system
- Durable Steering plate and servo-saver system, and aluminum Ackermann with pre-pressed bearings
- Ease of Use:
- Super easy front and rear differential access with 4 screws only
- Super easy access to the central differential and brakes
- Super easy lever system for the throttle and brake
- Super easy removal and re-assembly of engine, radio box, tank, complete front and rear, complete center assembly
- Super nice fuel tank with screw-on type fuel tube holders, insert-system to reduce tank volume, improved filter/clunk, improved fuel cap and spring
Specifications:
Wheelbase: 330mm
Width: 305mm
Weight: 3.300 grams ( race ready, depends on radio-gear and engine)
Clutch: 4-shoe centrifugal, carbon shoes
Differential: lightweight, 3 gear diffs
Brake: piston type with steel disks
Shocks: 16mm big bore with 3.5mm shafts
Fuel tank: 125ccm, with integrated bronze filter
Gear-ratio: 4:3:1
Includes:
- Kit
- Body
- Wing
- Silicone oils
- Full color manual-USB
- Decal sheets
Needed to Complete:
- .21 Nitro Engine & Tuned Exhaust System
- 2 Channel Radio System
- High Torque Steering & Brake Servo's (2)
- Receiver Battery
- Glow Driver
- Starter Box & Batteries
- Nitro Fuel & Fuel Bottle
- Paint for Polycarbonate Body
- Tires, Wheels & Glue
- Charger for Receiver Pack & Starter Box Batteries
This product was added to our catalog on June 2, 2016
