Scorpion Commander Series V 50 Volt 130 Amp ESC
Part#: SCP-130A-HV-ESC
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Scorpion Commander Series V 50 Volt 130 Amp ESC. The 5th generation Scorpion HV 130 amp Speed Controller has many upgrades and features never before available, including a user selectable output voltage, a phase-tach output certified to work in conjunction with the Mikado V-Bar system, and a built-in USB interface that allows programming and firmware upgrades from a laptop or PC.
Another great feature of the 5th generation speed controller is the USB interface that allows the user to set and view the internal programming parameters, as well as perform firmware upgrades that may be available in the future. The Scorpion V-Link USB programming module, available separately, allows the user to connect the ESC to a laptop or PC for easy programming changes either on the bench or at the flying field. This USB connection also doubles as a phase tach output for external governor systems such as the Mikado V-Bar system. With the optional Opto-Coupled Tach Output Cable, also available separately, you can feed the tach output directly into the V-Bar system. In addition to the Tach output for external governor systems, this speed controller also includes an internal governor for use with other brands of flight stabilization and flybarless control systems.
The 130 amp ESC comes with the full feature InfraRed Programming system that includes an IR Programming card and an IR Receiver module that installs between your ESC and the throttle channel of your radio receiver. This system has a full range of programmable features including:
Weight (Without Connectors): 184g (6.9 oz)
Max Continuous Current: 130 Amps
Operating Voltage Range: 12 to 50 Volts
Max BEC Output: None, Opto-Coupled
On Resistance: 0.68 mOhms
Size: 89x43x25.5mm (3.5x1.69x1.00")
Includes:
Another great feature of the 5th generation speed controller is the USB interface that allows the user to set and view the internal programming parameters, as well as perform firmware upgrades that may be available in the future. The Scorpion V-Link USB programming module, available separately, allows the user to connect the ESC to a laptop or PC for easy programming changes either on the bench or at the flying field. This USB connection also doubles as a phase tach output for external governor systems such as the Mikado V-Bar system. With the optional Opto-Coupled Tach Output Cable, also available separately, you can feed the tach output directly into the V-Bar system. In addition to the Tach output for external governor systems, this speed controller also includes an internal governor for use with other brands of flight stabilization and flybarless control systems.
The 130 amp ESC comes with the full feature InfraRed Programming system that includes an IR Programming card and an IR Receiver module that installs between your ESC and the throttle channel of your radio receiver. This system has a full range of programmable features including:
- Low Voltage Cut-off: Settable from 12V to 48V in 1.0V increments. No need to select battery type, just set the voltage the ESC should cut off at. By doing this, the ESC will be compatible with any battery chemistry, including future types of battery designs.
- BRK - Brake: Settable to 5 different levels: 1=No Brake, 2=Very Soft Brake, 3=Soft Brake, 4=Hard Brake, 5=Very Hard Brake
- AIR - Aircraft: Mode 1=Airplane Mode, 2=External Governor Mode
- PCT - Program Cut-off Type: LVC 1=50% power reduction, 2=LED Warning, no power cut, 3=Power Pulse Warning
- MAT - Motor Acceleration Time: Delay 1=0.15 seconds, 2=0.3 seconds, 3=0.45 seconds, 4=0.7 seconds and 5=1.3 seconds
- Car/B: Currently not used, for future Car and Boat options
- COP - Current Overload Protection: 1=Protection on, 2=Protection off. (Selecting option 2 will void the ESC warranty)
- FREQ - PWM Frequency: Currently fixed at 8 KHz and not changeable
- SS - Soft Start: Mode 1=Soft Start without Governor mode, 2=Soft Start with Governor
- TIM - Motor Timing Angle: 1=Automatic Timing, 2=5 degrees, 3=15 degrees, 4=20 degrees, 5=25 degrees and 6=30 degrees
- GOV or P Gain - Governor Power Gain: Settable from 1 to 11 (softest to hardest), Default is 5
- SB or I Gain - Governor Current Gain: Settable from 1 to 8 (least sensitive to most sensitive), Default is 5
Weight (Without Connectors): 184g (6.9 oz)
Max Continuous Current: 130 Amps
Operating Voltage Range: 12 to 50 Volts
Max BEC Output: None, Opto-Coupled
On Resistance: 0.68 mOhms
Size: 89x43x25.5mm (3.5x1.69x1.00")
Includes:
- (1) Scorpion Commander Series V 50 Volt 130 Amp ESC
- (1) Scorpion IR Programming Card
- (1) Scorpion IR Receiver Module
- (1) Instruction Manual
This product was added to our catalog on May 7, 2013