Scale By Chris Wraith Full Tub Drop Bed Insert

The Scale by Chris Wraith Full Tub Drop Bed Insert is a 3D printed accessory that allows you to add a custom touch to your Wraith or Wraith 1.9 rig. This drop bed slips right in between the shock mounts and fills the empty void in the back of the cage. The insert is held in place with your M3 screws installed through the shock mounts, measures 30mm deep, and allows plenty of room to add the scale accessories you want.

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.

This product was added to our catalog on May 14, 2019