Awesome servo, for both price and performance. It's honestly one of the fastest servos I've ever seen in action, right up there with the $100+ JRs. It's a little noisier than an XP or some other quiet servos, but it doesn't have the cheap "RTR servo sound" at all. They're also very smooth from the high resolution, and are so free spinning when you just turn the wheels. I use these in both my 1/10 truck and 2wd buggy and work awesome, plenty of torque for the size and insane speed when you need it.
Keep in mind that this servo pulls up to 5+ amps at 6V, so make sure you have a strong BEC on your ESC and use a reciever capacitor.
This is my first savox servo. I run it in a 1/10 sct and I couldn't be happier. Personally the only brand of servo I will ever buy again. Very quick but also smooth and built very well. I recommend this servo based on my experience also all the top guys at local track are running them all with flawless success. Two thumbs up!
Have three in a b4.1, 44.1 & t4.1 and couldn't be happier. Plenty of speed for steering and I run the Avid bell crank in the 2wd cars and only burnd up one cuz I didn't set the the EPA properly. Very durable, I crash a lot, (especially with the 44) trying to go as fast as the "fast" guys and these servos hold up well.
They are a bit noisy but just unplug when working with the power on just remember to plug back in before the race or you will look like Mr. Dumass at the tone! Trust me!
Very capable servo for 2wd Buggy iv had multiple of these with no issues.
Amain is False advertising the Specs as 52g servo weight
Mine is 58g
Just picked this up last night. I was a little nervous with how loud everyone kept saying it was. No louder than my traxxas it replaced.
WAY SMOOTHER. Easy to control, would put this in every car if I had more cars!
Mounted this servo in my T4.1 for steering. I have to say, this is the fastest servo I've ever owned! I can't imagine a scenario where this wouldn't be fast enough. Wow! Plenty of torque as well. It is heavier than other servos I've used.
Awesome to see that A Main is carrying these jems now!
I've got two of these, one is in my B44 and the other in my SC10 4x4. Although it's branded as a "Super Speed" servo it still has PLENTY of torq for my SC10 4x4. Never had a single problem with these servos in either vehicle. Had them now for over a year. Buy with confidence!
there is only one word to describe this servo "SUPERBA" it is so fast 0.7sec and loads of torque. the price is really what separates it from other sevos. I can get the exact same quality and speed out of a $100 reedy or a $200 Sanwa or futuba. I have used it for a week now and love it is so fast and powerful and has saved me from about 70% of near-crashes. I have one on my B74 with a Sanwa system and no browning out issues yet. just I would wish it came in different colours and not just orange. but I love it.
Great bang for the buck, had to replace the servo in my 4x4 monster truck, after looking over options that didnt break the bank I settled for the Savoy sc-1257tg. Needless to say I'm impressed quick response turning, I put it next to my other truck and the difference is night and day, I'll be changing out the servo's in my other 3 cars as money permits. Great job savox...
So far so good! This is super fast transit times and it is almost overkill for my RC10B6.1D. Excellent servo for the price. I was going to go with Protek but this was just as fast even at 6V. So far i've put about 500 laps with this at SDRC Raceway and i've had no problems.
I have been using this servo for a few months now and am quite happy with it. As others have pointed out, its a bit noisy but I don't care because it was priced more than fairly for the speed you get out of it!
These work great for throttle/braking in my 1/8th scale buggy. I have been running them for several gallons now and they have performed great since day 1.
WOW this servo is stupid FAST and yes plenty of torque, ran it in 2wd b4.1and 2wd st. Priced perfect wont bust a whole in your wallet either, GREAT buy!
I had this Servo on my Hot Bodies D413 and it worked great but then I started to have issues with it. I only ran it 3 times before it had issues. The servo started to act strange for example: It would work for a while then stop turning right unless I turned it left 1st then it would go right until it went back to neutral. I noticed the servo was hot to the touch also.
I think this servo is more for 2wd 1/10 applications.
