Samix Aluminum Front Shock Plate for Traxxas TRX-4 (Black)

Installed in a TRX-4 Sport. The quality is good and machining is precise all screw holes are aligned precisely.

The pan hard mount being much thicker than some others in the market should eliminate flex experienced on the stock plastic mount that it also replaces. If you have a strong steering servo this mount will improve steering force and control under load as there is quite a bit of flex between the upper and lower panhard mounts on the stock plastic mounts. I would suggest replacing the stock lower panhard mount as a complete upgrade.

There are multiple threaded holes for the shock placement on the mount which should give some setup and tuning options or adaptation of different length of shocks should the need arise.

It comes with screws to mount the panhard mount and the tower but does not include a screw to mount the shock. Since the stock shock screw now becomes too long you will have to re-use the old screws that this mount replaces.

This shock tower is not compatible with TRX-4 wheel fenders if you have it installed on a Sport.

Amazing. I bought some hot racing cheap ones off fleabay.cheap and the panhard mount bent like a wet noodle. Eventually sheered in half and was mangled like a pretzel. So I buy these and they're monstrous compared to the cheap-o ones. These haven't budged, yet I've destroyed many front end parts. I'm right now buying a new metal steering servo horn because my trx6 took a header off a sand dune jump and snapped that piece clean in half, but the panhard mount survived. Very happy with it.