Perfect Scale Off-Road RC Truck - Yota TF2
This RC4WD Trail Finder 2 receives some key updates along with a hyper detailed Toyota Pickup Hard Bodyshell. The Trail Finder 2 Chassis is a staple in extreme scale chassis for its realistic axles, suspension design, and detailed accessories. This chassis features the updated X-Ring equipped scale shocks, XVD Yota II axles, and Over/Under leaf spring mounting locations. The Toyota hard body includes a molded interior, scale emblems, and a opening the hood to show off the 22R engine bay. Get ready to hit the trail with a showroom quality truck that is sure to turn heads.
About the TF2 1982 Toyota Pickup
Detailed Hard Body
The stunning hard body is molded in hard plastic to allow for detailed panel lines and a more "true to life" finish. Painted in white and red, this truck includes the iconic decals splitting the two tone paint job. This truck also includes the optional Marlin Front bumper that can be installed to protect the detailed Toyota Grille. Look inside the windows to see the molded interior. Pop the hood, and pull up the hood support rod to check out the molded engine bay. This thing is sick! Everything from the scale 22R engine, intake, carburetor, battery, vacuum brake booster, and so much more. Toyota 22R enthusiasts will want to ensure the firing order is set to 1-3-4-2.
Chassis Design
RC4WD wanted to ensure this truck would not just look the part but also perform the part. The leaf sprung chassis includes the helper springs and internal shock springs, however, they are not installed from the factory to allow for better drivability. The included shocks are now equipped with X-rings to allow for smoother movement. The chassis also allows for the optional front Marlin bumper to be attached, as well as the rear tube bumper. These bumpers are not installed from the factory but can be added to help protect the hard body.
Durable Drivetrain
The R3 single speed transmission uses a metal shaft to power the Hammer Transfer case. Two splined driveshafts deliver power to the updated Yota II axles. The front axle now uses two ball bearings and a longer lower screw to support the XVD outdrive. The front and rear differentials are locked to ensure constant wheel speed for off-road performance.
Powerful Electronics
Powering this off-road vehicle is the Outcry III Waterproof ESC. This ESC is capable of running on a 2-3S LiPo battery or a 5-9cell NiMH battery. The brushed 45T motor is designed to deliver smooth torque and good RPM speeds. A high-torque Twister Metal Gear Servo is used for steering and boasts 277.6oz-in of torque at 6.0V (305.3oz-in at 7.2V). The included transmitter allows for easy setup and driving of your TF2.
Features:
- 1982 Toyota Pickup Hard Body
- Pre-installed Led Light Set
- 1.7" Stamped Steel Beadlock Wheels
- RC4WD BFGoodrich All Terrain K02 1.7" Scale Tires
- Yota II Ultimate Cast Axles with XVD
- Update Over or Under Leaf Spring Mounting Locations
- Front Inner Fender Set
- Detailed 22R Engine Bay (includes Dress Up Kit)
- Includes Marlin Crawler Front Bumper and Sliders
Includes:
- (1) RC4WD Trail Finder 2 Chassis
- (1) Pre-Painted Toyota Pickup Hard Body
- (1) 6cell 3000mAh NiMH Battery w/XT60 Connector
- (1) NiMH Wall Charger
- (1) 2.4GHz Transmitter
- (4) AA Batteries
- Product Manual
Needed To Complete:
- Nothing! Everything you need is in the box!
Recommended to Complete:
Specifications:
Scale | 1/10 |
---|---|
Length | 21.2in (538.0mm) |
Width | 8.4in (214.0mm) |
Height | 8.0in (203mm) |
Wheelbase | 11.2in (284.0mm) |
Ground Clearance | 1.8in (45.0mm) |
Input Voltage | 2-3S LiPo or 5-9cell NiMH |
Assembly Level | Ready-to-Run |
*Ready to Run Models come assembled with pre-installed electronics from the manufacturer. Most still require a battery, charger, and other accessories. Please check the "Not in the Box" to ensure you have everything you need to get out and play!
This product was added to our catalog on August 22, 2024