No Superior Designs RC Axial SCX24 Aluminum Servo Mount

You got the rs100m micro servo for your steering. You’ll need this mount to pair it along with your scx24. Easy to mount, made out of aluminum. No need custom 3d printed mount or flimsy plastic tray mount. NSDRC has you covered direct mount for the rs100m micro steering servo, I tested it it’ll fit the Emax servos and others. The bonus end out this mount it has the threaded on both ends for the 4 link setup.

Great aluminum mount for your scx24 rig, fits great

Installed on a SCX24 C10. This allowed me to mount a Reefs99 servo without having to trim the stock mount, which would also work but I wanted a metal mount. If you are looking to mount a micro servo to a stock SCX24 chassis you should know the servo itself is about the same width as the inside of the chassis rails. The truck will not fully compress down evenly in the front without getting some binding from the servo tabs in the chassis. It does flex side to side fine, though. There is a small gap between the servo and the mount, it does not sit completely flush to the mount but this does not affect performance, this may be different for other servos. I had to mount the servo directly in the middle between the top and bottom tabs. For the Reefs99, I had to grind the top mounting tabs off with a Dremel to get it to work without constantly getting hung up in the chassis. 5 stars because it is good quality and this is a great option for a metal mount if you want to run a larger servo than stock.