MyTrickRC Four Way LED Splitter Cable

The MyTrickRC Four Way LED Splitter Cable lets you connect 4 LEDs to one port on your controller. The primary purpose for the 4-Way LED Splitter is for adding Rock Lights to your Rig. And since your Dragon Controller is normally connected to your body, the 4-Way LED Splitter has in in-line Quick Disconnect so that you can easily unplug your you Body from the Chassis! So the 4-Way side of the cable connects to your Rock Lights and stays permanently attached to your chassis, while the other end stays permanently plugged into your Controller.  

Also, the 4-Way LED Splitter is compatible with ALL MyTrickRC Controllers so expanding your lighting system is easier than ever. This Cable can be used with Standard 3mm & 5mm LEDs, Attack Light Bars, Rock Lights, Spot Lights, Wafer Headlights, and Halos.
 
NOTE:

• Group A = RED, ORANGE, and AMBER LEDs  (are compatible with each other)
• Group B = WHITE, BLUE, and GREEN LEDs  (are compatible with each other)
• Groups A & B are not compatible with each other. So, if you connect a RED and WHITE LED together, only the RED will turn on. This is because Group A LEDs have a lower voltage drop, so Group A steals all the power if combined together.
• When using these with Attack Lighting, DO NOT connect more than Two Light Bars, or 4 pairs of Attack Headlights, Rock Lights, Spot Lights, Halos, or Wafer LEDs to this cable, or you risk overheating it.
• The 4-Way LED Splitter can be used with the DG-1 or UF-7C controllers. However, if you have a UF-7C you will also need a Standard Light Bar Regulator. The Standard Light Bar Regulator will ensure that your Rock Lights never receive too high of voltage, thereby damaging them.

This product was added to our catalog on April 5, 2021