MST MPA CVD Axle (2)

These things snap like a cheap chair. I don't know if it's just a bad batch, but looks to be a bad design. Broke 4 in a 2hr run. I will bench my rig until I can find an upgrade to this part.

I have to agree with other reviews, broke 2 in 2 packs rolled. The CFX-W is a great machine, but these shafts are a problem. Pins should have be 1.5mm instead of 2mm. Then the ball would be thicker and we would break pins instead of shafts. This is what I experiment with my SCX10 V1 with axial HD shafts. Replacing 1.5x11 pins is easy, cheap, and it doesnt make the shaft too weak for a scaler.

These shafts should be way cheaper at least, because obviously if you use your truck you'll pass some. I don't know why they are so much more expensive than regular CFX.

This is highway robbery. For the quality of metal, and lack of strength, this should be a much cheaper part.

Weak metal, under load breaks, is expensive ( Several cases of breakage ...

Too expensive for a stock part that breaks fairly easily and is out of stock.

Disgusting quality
10 minutes drive to breakage
The inversion of the wheel is limited to 70%
For that price, they must be eternal
Probably have to sell the chassis.
The manufacturer does not want to modify the node, and the alternatives I don't know

Wish I saw reviews of this product before I purchased them. To no exaggeration 3 axles snapped in less than 10 mins. I was crawling over some cinder blocks something even the cheapest of axles should be able to do! I feel that this company should have to send free shafts to all the people who spent $200 on an axle set, not have to spend another $50 to have them snap again in 10 mins. What a horrible company with a product like this they can’t last!!