Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2) w/Hive 17mm Hex Wheels
Tire Overview:
The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. Designed specifically for the rear of 1/7 scale RC vehicles, these Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.
Note:
- Arrma 1/8 Felony Owners: These are the same diameter as the Felony front tires. Therefore, you need to change the gearing in the rear to match the front gearing. Or, you could have overdrive in the font by not changing
- Arrma 1/8 Limitless Owners: These fit directly on the rear without any trimming or regearing. The 10mm wider stance enhances rear traction bias as well as providing a meaner look.
- Arrma 1/8 Infraction Owners: These will work on the rear of the infraction but you will need to trim the fender flares in the rear to accommodate the wider tires. No regearing necessary as they are the same diameter as the stock rear tires.
Features:
- Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
- Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics, and hub bearings
- Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
- Generous tread depth for long wear and the ability to easily clear debris
- Pre-mounted to Hive Wheels
Specifications:
- Tires:
- Diameter: 3.94in (100mm)
- Width: 2.13in (54.1mm)
- Wheels:
- Hex: 17mm
- Width: 2.13in (54.1mm)
- Center Bore: 0.84in (12.3mm)
- Weight: 5.92oz(168g)
Includes:
- Velociter Belted Tires
- Hive Wheels
- Foam Inserts
This product was added to our catalog on December 13, 2022
Mohit Gulati
Verified Owner
Monday, Aug 12 2024 (4 months ago)
Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2)
Absolutely Worthless !! Good only for TOY CARS for kids !!!
Earnest Franklin
Verified Owner
Monday, Jan 29 2024 (11 months ago)
Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2)
I tried these street tires on my slash two-wheel drive for the rear I have a 5700 KV motor and I drove the car with the wheels on there for 5mins and they blew off the rim then I glue them back to give them another try but they blew off again it's a good tire just needs more foam inside because it makes a lot of sound going high speeds and a better gluing job to keep them together love the width of the tire for bashing around kept car more stable from flipping over on tight turns
Peter Frigon
Verified Owner
Saturday, Sep 16 2023 (about a year ago)
Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2)
They look cool, but 3 out of 4 blew off the outer beads on a test hit. No reply from A-Main on this so I can’t recommend them for any actual speed runs.
