Mini-B - Performance Based Mini 2WD Buggy
The Losi Mini-B 1/16 Pro 2WD Buggy Roller Kit is a great way to choose the exact electronics you need for peak performance. This roller kit is designed to be extremely stable on the track generating quicker speeds with improved handling. Included with this roller kit are an aluminum chassis, threaded aluminum shocks, an aluminum steering servo, aluminum bellcranks with drag link, and an aluminum front pivot block to add to the performance of the chassis. The included tires come pre-mounted for ease of use and setup. Losi has set this buggy up to give an impressive experience from a 1/16 chassis.
About the Mini-B
Suspension
The track ready design of the 1/16th scale allows for extreme stability on the track generating quicker speeds and improved handling. The included 7mm bore aluminum threaded shocks allow you to fine tune your car to the track. Adjustable turnbuckles allow you to further refine the suspension to suite your driving style.
Chassis
A 1.5mm aluminum chassis provides the needed strength and durability for performance racing. An aluminum front pivot block, aluminum bellcranks, and aluminum drag link help reduce flex making the car feel tighter around the track. With the mid-motor setup, this buggy has the performance and balance needed to be competitive.
Drivetrain
Getting the power to the ground is an all-metal bearing supported drivetrain. The 3-gear transmission uses a 3-gear differential to provide even power to the ground. Steel outdrives and steel dogbones take the rotation from the transmission to the hexes. The front spindles are also bearing supported for high efficiencies.
Features:
- Scaled down version of the 1/10 TLR 22
- TLR 22 Suspension Geometry
- Mid Motor Configuration
- Elastomer Battery Strap System
- Aluminum Chassis
- Threaded Oil Filled Shocks
- Fully assembled and ready-to-run
- Taper Pin Front and BK Bar Rear Tires with Dish Wheels
- Full Ball Bearings (less steering)
Includes:
- (1) Losi® Mini-B Pro Roller: 1/16th 2WD Buggy
- (1) 18T Pinion Gear
- (1) Decal Sheet
- (1) 1.5mm L Wrench
- (1) 2mm L Wrench
- (1) 4-way Cross Wrench
Needed To Complete:
- (1) Steering Servo
- (1) ESC
- (1) Motor
- (1) Receiver
- (1) Radio
- (1) Battery
- (1) Battery Charger
- (1) Paint
Specifications:
| Scale |
1:16 |
| Drive |
2WD |
| Power Source |
2S LiPo |
| Length |
10.71in (272mm) |
| Wheelbase |
7.52in (191mm) |
| Width |
7.01 (178mm) |
| Height |
4.02in (102mm) |
| Weight |
- |
| Assembly Level |
Roller |
*Tech Note: Roller Chassis models come fully assembled and ready to receive your choice of electronics. Please check the "Needed To Complete" above to make sure you have everything you need to get out and enjoy your RC model.
Manuals:
User Manual
