This is the Losi LST XXL2-E Brushless Ready to Run Monster Truck. When Losi set out to develop the ultimate electric monster truck, they knew if it was going to wear the Losi name, it had to leave a mark - both on the ground, and on its spectators. So they chose to start with the only platform that was as brutal as its reputation. The LST XXL 2. Nothing can stand in the way of the LST XXL 2, and the electric power plant allows this huge truck to reach the gigantic speeds you have only dreamed about.
The LST XXL 2 packs ferocious features into a sturdy 1/8-scale build that can hold up to abuse and unforgiving driving conditions. Equipped with a 6S compatible Dynamite ESC and AVC technology, you can harness the power of this larger than life monster truck with enhanced stability and directional control for total full throttle freedom. This enormous truck is equally vicious off-road thanks to extreme durability and a 4WD drivetrain that just won’t quit.
Features:
- Equipped With AVC® Technology
- Dynamite® 2200Kv Brushless Motor
- Dynamite 6S compatible ESC
- Spektrum™ DX2E 2.4GHz radio system included
- 4WD shaft-driven drivetrain
- Capable of speeds of 60+ MPH*
- Oversized shocks for superior handling
- Waterproof electronics
- Highly durable 2.5mm aluminum chassis
- Wheelie bar included
- Waterproof electronics
- Sealed differentials
- New body design
Specifications:
Type: Monster Truck
Scale: 1/8
Length: 28.5 in (724mm)
Width: 18.5 in (470mm)
Height: 9.8 in (250mm)
Ground Clearance: 3.7 in (94mm)
Wheelbase: 15.3 in (391mm)
Chassis: 2.5mm Plate, 6061-T6 Aluminum
Suspension: Oil Filled Coil Over, Independent
Drivetrain: 4WD
Tire Type: 6.9 in (175.3mm) 420 ATX
Motor or Engine: 2200Kv Non-Sensored Brushless
Speed Control: Included
Radio: Spektrum DX2E DSMR, 2.4Ghz 2 CH with AVC
Servos: Included
Batteries: Not Included
Charger: Not Included
Gear Pitch: 1.0 Module
Wheel Size: 4.1 in (105mm)
Kit/RTR: RTR
Shock Type: 5.9 in (151mm) Aluminum
Body: XXL-E, Painted, Screened
Ball Bearings: Complete
Is Assembly Required: No
Needed To Complete:
- (2) 2S 7.4V or 3S 11.1V 50C+ LiPo batteries with EC5 connector
- Dual LiPo battery charger with EC5 charge plug
This product was added to our catalog on August 13, 2015
Only negatives so far were the wheels/tires came quite out of balance. Losi's parent company sent me 4 brand new tires, wheels, and hubs. Quite happy about that. Lastly, I was tightening the slipper nut this morning and broke the end of the assembly rod. My fault. Ordered the fixes from Amain so I should be back up and running soon.
If you're on the fence (as I was) about purchasing this beast, just buy it. I've had zero issues w/ diffs, screws backing out, etc.. Completely satisfied and know that this truck will last for years to come. A+ Losi.
I installed the Team Assiciated Thrust Bearing and follows my techs advice. I cranked the slipper clutch adjustment all the way down and backed it off 1/8 of a turn, and it seemed a little "grabby" so I backed it out maybe another 1/8 for a total of a 1/4 turn. And all seems fine. It runs great and I now have 8 packs through it. No breaks, no issues and I DID send it 20ft into the air and stuck the landings, and it's fine! Go get one,you won't be sorry!