This is the Kyosho MFR Readyset four wheel drive nitro powered monster truck. Experience the breathtaking performance that transforms any open space into an off-road battleground. A newly developed triple-floor structure realizes amazing strength and rigidity in the largest 1/10 class machine that successfully delivers both a low center of gravity and deep stroke suspension. The wide tread unique to big tire machines results in an almost square wheelbase which combines with minimal overhang dimensions to produce devastating running performance.
The drivetrain is equipped with two-speed automatic transmission and a strengthened new QRC transmission. Feel the machine's blistering acceleration as it launches from a standing start and smoothly reaches its maximum speed and takes any kickbacks from the surface in its stride while the 3rd channel switch on the transmitter shifts the machine easily into reverse. Optimal balance corrects the posture as it hits the ground on jump landings without skipping a beat and delivers sharp acceleration.
This ultimate combination of power and performance is delivered in a Readyset package so you can unleash the beast straight out of the box. An electronic starter makes engine starting easy too so simply add batteries (sold separately) and fuel (sold separately) to get going. The heart thumping excitement of wild off-road racing starts right here with the “MFR”!
Features
- Newly designed chassis boasts powerful performance from the center-shaft drive 4WD.
- Fully assembled Readyset. Includes printed body complete with color scheme.
- Features high-torque KS-302DS servo for steering and KS-3DS digital servos for other controls.
- Equipped with newly developed strengthened New QRC transmission that shifts into reverse with the 3rd channel switch on the transmitter.
- Switch the 3rd channel switch to neutral position to prevent sudden movement when starting the engine. Use the same switch to control reverse movement.
- Almost symmetrically divided center shaft 4WD realizes control-friendly response.
- Upper and lower sub-chassis structure incorporates the front and rear bulkheads for greater strength and rigidity.
- New front and rear differential gear units feature additional support around the drive shaft bearings for increased durability. Includes two-bevel gears using tough machine cut helical gears.
- Maintenance-friendly design enables easy removal and reassembly of radio box, transmission, engine and suspension shafts etc.
- Equipped with dust proof radio box that not only protects the receiver and batteries etc. but also contributes to chassis rigidity.
- In addition to the suspension arms, the knuckles, shock stays, gear boxes and shocks are interchangeable between front and rear for efficient maintenance and parts utilization.
- New Touch Starter unit features safety circuit and delivers stable plug heating for easy engine starting.
- Large capacity 103cc fuel tank supplies the 18-size engine to deliver run times of about 8 minutes.
- Includes stylish chrome wheels as standard.
Specifications
Length: 505.5mm
Width: 418mm
Height: 230mm
Ground Clearance: 63mm
Wheelbase: 347.5mm
Tread (F/R): 338mm / 338mm
Tire(F/R): 145×80mm / ?145×80mm
Gear Ratio: Forward (1) 24.3:1 / Forward (2) 15.6:1 / Reverse (1) 28.0:1 / Reverse (2) 17.9:1
Weight: 3,270g (approx.)
ReadySet Contents
Factory assembled chassis with 3-channel, 3-servo R/C unit installed
Factory-finished printed body with stickers applied
PERFEX KT-10 Transmitter
Fuel bottle
Cross wrench
Required for Operation
7.2v, Ni-Cd or Ni-MH Battery
R/C Charger For Battery
8 AA-size Batteries for Transmitter
R/C Fuel
This product was added to our catalog on October 16, 2008
