Kyosho Hard Front "MS" High Camber Mount Shock Tower

Beautiful option, but it would have been nice to know ahead of time that it requires taller shocks! That should be noted in the webpage description.

smooths out the aggressive steering inherent in the Tki4, does not take away steering but does slow the transitions = more front grip. i ended up going up to 2.5mm front sway as it does roll more and the package felt amazing. highly recommended for low grip

*** Summary: High caster and low grip set: IFW465 Tower + IFW466 hard front upper sus holder + IF484 MS sized shocks + IFW457 springs

*** IFW465 Kyosho Hard Front "MS" High Camber Mount Shock Tower

The Kyosho MP9 TKI4 Hard Front "MS" High Camber Mount Shock Tower is an optional high mount tower.
The mounting holes are set 2mm higher to deliver faster corner speeds.
This tower is taller than the "S" High Camber Tower and best suited to low grip, rough surfaces.
Must be used with IF484 MS sized shocks and IFW466 hard front upper sus holder and + IFW457 springs .

*** IFW466 Kyosho MP9 TKI4 Hard Front Upper/Rear High Camber Mount Suspension Holder

It is an optional part designed to be used with the Kyosho High Camber Mount Shock Towers (KYOIFW465, KYOIFW464).
When combined with the correct towers this mount helps to provide faster corner speeds.

*** IF484 MS sized shocks. 50mm MP9 MS

This is an optional Kyosho 50mm Medium/Short Threaded Big Shock Set.
These optional medium/short 50mm front shocks are compatible with the full range of MP9 vehicles,
but must be used with the optional KYOIF485 front shock tower, and IFW457-series springs.
Package includes all the parts needed to build two shocks, but does not includes springs or shock oil.

*** KYOIFW457-814

This is a set of optional light blue big bore shock springs for the Kyosho Inferno MP9 buggies. These are the medium/short length springs that can be used on the front or rear of the MP9.
Medium Length 78mm Shock Spring Specifications:
Softer
IFW457-8514: Orange - 8.5 turns/1.4 wire (3.40lb-in / 608.65 n/m)
IFW457-814: Light Blue - 8 turns/1.4 wire (3.68lb-in / 659.38 n/m)
IFW457-7514: Gray - 7.5 turns/1.4 wire (4.02lb-in / 719.32 n/m)
Harder

Can someone let me know.. what shocks is needed for the MS tower

Is it 50mm shocks?