HPI Vorza FLUX RTR 1/8 4WD Electric Brushless Truggy
This is the HPI Vorza 1/8 Ready-to-Run (RTR) Electric Truggy. This powerful 6S capable truggy with all metal drivetrain, sturdy 4mm aluminum chassis, aluminum shock towers and a twin clamp style cast aluminum motor mount so it won't move or shift under the immense amount of torque to ensure a high level of durability and toughness is more than just a great basher. This Vorza is also ready to race out of the box. All components of the Vorza drivetrain and electronics designed to sit flat on the chassis, giving the truggy a very low profile and super low center of gravity for supreme handling through turns and corners. The front suspension features inverse steering blocks, super thick top links, aligned king pin and universal joint driveshafts, sway bar, counter-rotating shock mount screws and 16mm threaded Big Bore shocks with racing tuned springs.
Features:
- Factory-assembled pre-painted 4WD 1/8 scale Car
- Pre-painted body with awesome speed graphics
- Pre-mounted all-terrain tires
- High torque metal geared steering Servo
- 6S LiPo Capable waterproof electronics
- Aluminum heatsink motor mount help the motor stay cool with optional fan mounting points
- Efficient and tough shaft drivetrain with front universals
- Threaded 16mm Big Bore oil-filled shocks for confident control
- 4mm aluminum chassis and shock towers
- Front and rear sway bars for excellent handling
- Hardened steel spur and pinion gear with spiral cut bevel gears for the best balance of strength and efficiency
- Tough oil-filled 4-gear differentials
- Suspension based on World Championship pedigree
- Super low center of gravity (CG) for superior handling
- Nylon stone and dirt guards keep rocks out of the chassis
- Full set of rubber-sealed ball bearings
- Adjustable battery tray that can accommodate a single 4S or 6S pack
- Enclosed receiver box
Specifications:
- Chassis:
- Scale: 1/8
- Length: 508mm
- Width: 205mm
- Height: 178mm
- Wheelbase: 325mm
- Drivetrain: Shaft driven 4WD
- FLUX ELH-6S Electronic Speed Controller (ESC):
- Input Voltage: 3-6S LiPo
- Continuous Current: 150A
- Burst Current: 950A
- BEC: 6V/3A Switching BEC
- Battery Connector: T-Style plug
- FLUX MLH-2200 motor:
- kV: 2200
- Motor Limit: 4S-6S LiPo
- Motor Shaft: 5mm
- Connector: 6.5mm Bullet
Includes:
- (1) HPI Vorza FLUX 1/8 RTR 4WD Electric Brushless Truggy
Needed to Complete:
- (4) AA batteries for transmitter
- (1) Compatible battery charger
- 4S setup:
- (2) Matching 2S LiPo (4000mAh 40C minimum) with T-style plug
- 6S setup:
- (2) Matching 3S LiPo (4000mAh 40C minimum) with T-style plug
This product was added to our catalog on April 21, 2023
