Hobbywing Xerun 120A V2.1 Sensored Brushless ESC/Motor Combo w/Program Box (10.5T)

This is the Hobbywing Xerun 120A V2.1 Sensored Brushless ESC and 10.5 Turn Motor Combo, with an included LCD Program Box.

V3.1 Versus V2.1
Aside from being a smaller and lighter ESC, the V3.1 also features a built-in electronic switch, aluminum bottom case and additional programming capabilities, plus more. Aside from these differences, V3.1 and V2.1 are quite similar. In fact, the V2.1 is a very capable ESC and will satisfy the needs of most racers. 

ESC Features:

• Compatible with most of sensorless and sensored brushless motors such as Novak, LRP, Orion and Tekin, etc.
• Large current endurance.
• Most effective cooling structure.
• Excellent start-up, acceleration and linearity features, best control feeling.
• Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
• Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
• Internal timing can be changed easily to make the ESC suitable for various of motors.
• Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
• ESC firmware can be updated through the USB adapter in the LCD Program Box .
• Plenty of firmware available for all kinds of competitions.
• Standard firmware for MODIFY competition.
• Supercharged firmware(with turbo timing) for SUPER STOCK competition.
• Zero timing firmware for ROAR SPORTMAN race and other fair races.
• Also suitable for rock crawler pro race when using “Crawler” working mode.

Motor Features:

•  Top quality materials:
• Aluminum shell (case)
• Best quality magnets of high temperature endurance
• Copper wires of high temperature endurance
• Top quality bearings
• Dustproof design.
• 5.5T to 21.5T motors use low resistance 3.5mm bullet-connectors, plug and play.
• The sensor port is parallel to the end bell, easy for installation, more suitable for smaller chassis with limited space.

ESC Specifications:
Current: Continuous: 120A
Burst: 760A
Input: * Note #1     4-9 cells NiMH/NiCd, 2-3S LiPo
Built-in BEC: 5.75V@3A (linear mode)
Resistance: 0.0003 Ohm
Motor Supported: Sensored and sensorless brushless motor
Suitable Motor: With 2 Lipo or 4-6 NiMH = 1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T. With 3 Lipo or 7-9 NiMH = 1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T
Suitable Car: 1/10, 1/12 all competitions, 1/10,1/8 rock crawler
Cooling Fan: 5V
Size: 43mm(L) * 36mm(W) * 33mm(H)
Weight: 105g
*Note #1:

• For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.
• For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan need be changed to 12V high voltage fan.

Motor Specifications:
kV: 3300
Motor Diameter: 35.8mm
Motor Length: 52.8mm
Shaft Diameter: 3.17mm
Shaft Length: 15mm
Weight: 160g
Timing: No, fixed timing

LCD Program Box Specifications
Size: 90mm (L) * 51mm (W) * 17mm (H)
Weight: 65g
Input Voltage: 4.5-12.6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box)
Display: 16x2 characters LCD.
Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)

This product was added to our catalog on July 29, 2014