Hangar 9 P-47D-1 Thunderbolt 60 ARF Airplane Kit

This is the Hangar 9 P-47D-1 Thunderbolt 60 Almost-Ready-to-Fly Airplane Kit. Hangar 9's P-47D-1 is a remarkable scale tribute for the RC pilot who wants an authentic large warbird that packs a punch, yet handles well during landings, high-speed maneuvers and other critical moments.

Fully-sheeted construction complements the accurate scale outline while flat-finish printed UltraCote covering offers amazing detail that's easy to maintain. Plug-in wings make transport and storage fast and convenient. The hardware for gas, glow or electric power has been included, plus a large hatch provides quick access to critical components. Furthermore, four sets of graphics and group numbers are included so the squadron at your RC field can perform in the air or on the flight line with distinction.

Features:

• Printed, flat finish UltraCote® covering with extensive panel line detail
• Operational flaps provide an enhanced appearance and flight envelope
• Accurate representation of the scale outline
• Internal flap and elevator linkages
• Fiberglass cowl with dummy engine, plus intercooler exhaust doors, turbo and waste gate exhaust detail
• Fully sheeted, airfoiled tail surfaces
• Gear doors, scale tires and 8-spoke wheels hubs included
• Wing guns and removable radio antenna detail included
• Two-piece, plug-in wings for easy transport
• Large, removable top hatch with magnetic closure
• Includes four scale nose art and identification number sets
• Wing pylons with dummy wing tanks & bombs
• Optional electric retracts
• Machined aluminum spinner nut included

Specifications:
Wingspan: 67.0 in (171 cm)
Overall Length: 58.0 in (147 cm)
Wing Area: 825 sq. in. (53.2 sq. dm.)
Flying Weight: 10.3-11.5 lb (4.7-5.2 kg)
Engine Size: 0.61-0.91 2-stroke glow, 1.00-1.25 4-stroke glow, 15cc 2-stroke gas
Motor Size: Power 60
Radio: 5+ channel radio system (6+ channels for retracts)
Servos: 7 standard servos required (6 for EP)
CG (center of gravity): 4-3/16 in (106mm) back from the leading edge of wing and wing root
Prop Size: 12-16 in (305-406mm) diameter
Spinner Size: 1.0 in (25mm) spinner nut included
Speed Control : 80-amp brushless
Recommended Battery: 22.2V 6S 5000mAh 30C LiPo
Flaps: Yes
Retracts: Optional
Control Throw:
     -Ailerons: Low: 10mm up, 8mm down, 20% expo; High: 16mm up, 14mm down, 25% expo
     -Elevator: Low: 14mm up/down, 20% expo; High: 20mm up/down, 25% expo
     -Rudder: Low: 20mm right/left, 20% expo; High: 30mm right/left, 25% expo
     -Flaps: Mid: 32mm down; Full: 60mm down
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 15-20 Hours
Is Assembly Required: Yes

Needed To Complete:

• Internal Combustion
• 5+ channel transmitter and receiver radio system (6+ channels for optional retract operation)
• Receiver Pack
• (7) standard servos
• Engine
• Ignition battery
• Propeller
• Electric Power:
• 5+ channel transmitter and receiver radio system (6+ channels for optional retract operation)
• (6) standard servos
• 60-size brushless outrunner motor
• Speed Control
• Propeller
• Flight battery pack
• Charger for flight battery

This product was added to our catalog on July 18, 2013