STOL Performance Meets Aerobatic Prowess
This is the Twin Otter 80E Super PNP Electric Airplane from Flex Innovations, a model that combines short takeoff and landing (STOL) capabilities with remarkable aerobatics. Designed for both scale and 3D enthusiasts, this aircraft features advanced technology and powerful components that make it ideal for a wide range of flying styles. Whether you are a beginner or an expert pilot, the Twin Otter 80E is equipped to deliver an unforgettable flying experience.
About the Twin Otter 80E Super
Advanced Flight Control System
At the heart of the Twin Otter is the Aura 8 Advanced Flight Control System, offering a sophisticated stabilization system that enhances flight precision. With pre-configured flight modes, the Aura 8 gives you the option to fly with low rates or high rates, ensuring that both beginner and expert pilots can fully enjoy the aircraft's capabilities. The system also supports differential thrust, giving you unparalleled yaw control for impressive aerobatics.
Powerful and Efficient Motors
Equipped with counter-rotating Dualsky 3520C V2 ECO 510KV motors and 60-amp HobbyWing ESCs, the Twin Otter provides excellent power and efficiency. These motors, combined with 14x6 wooden props, ensure smooth, predictable flights with plenty of thrust for advanced maneuvers. The Twin Otter is designed to accommodate a single 6s 5200-6200mAh LiPo battery, making it easy to achieve long, enjoyable flight times.
Durable and Transport-Friendly Design
Despite its large 90-inch wingspan, the Twin Otter is easy to transport and assemble. The two-piece wing and removable stabs allow for quick disassembly, and optional wing bags help protect the aircraft during transport. Made from tough yet lightweight EPO foam with an internal wood and carbon fiber structure, the Twin Otter is built to handle both demanding aerobatics and the occasional rough landing.
Features:
- Advanced Aura 8 AFCS with pre-programmed flight modes
- Counter-rotating Dualsky 3520C V2 ECO 510KV motors
- Removable battery tray for quick battery changes
- STOL capabilities for short takeoffs and landings
- Huge top hatch for easy access to battery and equipment
- Large control surfaces for superior maneuverability
- Two-piece wing and removable stabs for easy transport
- Float-ready airframe for optional floats
- TWIN HobbyWing 60A ESCs with S-BEC
- Factory-applied trim scheme for a sleek look
Includes:
- (1) Twin Otter 80E Airplane
- (1) Aura 8 Advanced Flight Control System
- (2) Dualsky 3520C V2 ECO 510KV motors
- (2) 14x6 wood props
- (6) DS34 metal gear digital servos
- (1) DS15 metal gear digital servo for nose gear
- (1) Pre-Installed LED Light Kit
- (2) HobbyWing 60A ESCs with S-BEC w/EC5 Connectors
- (1) Detailed instruction manual
Needed To Complete:
- (1) 8+ Channel Computer Radio*
- (1) 6S 5200-6200mAh LiPo battery
- (1) Independent 3S LiPo Battery for LEDs*
- (1) Spektrum SPM4651T or Futaba R2001SB receiver
- (1) Compatible Battery Charger
Specifications:
| Length |
74.25in (1886mm) |
| Wingspan |
90.0in (2286mm) |
| Weight |
9lb 13oz (4450g) |
| Material |
- |
| Power Source |
Electric |
| Input Voltage |
5200-6200mAh 6S LiPo |
| Motor |
Brushless 3520C-510kV |
| Connector |
EC5 |
| Assembly Level |
PNP** |
*Tech Note: In order to control the LEDs from your transmitter, you must use a standard receiver that is capable of 9+ channels and keeps the servo ports active when using a digital data stream such as S.Bus. Additionally, it is required to use an independent 3S LiPo battery to power the LEDs. Failure to do so can damage your flight batteries.
**Tech Note: Plug-N-Play aircraft come equipped with some on-board electronics and still require a compatible transmitter for operation. Please check the Needed to Complete to make sure you have everything you need to get up in the air!
Manuals:
User Manual
