High-Performance Scale Aerobatic Aircraft
The Laser 200 60E Super PNP Electric Airplane from Flex Innovations is a modern tribute to a legendary aerobatic aircraft. Inspired by Leo Loudenslager’s groundbreaking Laser 200, this model carries forward its legacy with championship-level performance and iconic design. Built by F3A and 3D World Champion Quique Somenzini, it combines advanced technology with optimized aerodynamics, redefining foam XA/3D aircraft. Available in stunning retro and modern schemes, it delivers performance and style to stand out at any airfield.
About the Laser 200 60E Super
Precision Engineering and Performance
The DualSky 4120C-8 500KV ECO Series Motor powers the Laser 200 60E, delivering smooth and consistent performance. Combined with the Genuine 80-Amp HobbyWing ESC, this setup ensures efficient power delivery and exceptional thrust for precision aerobatics. The advanced Aura 8 AFCS enhances stability and control, making the Laser 200 60E perfect for both competition-level pilots and enthusiasts.
Iconic Design Meets Innovation
Paying homage to the full-scale Laser 200, this model features iconic lines and extra-scale details for an authentic appearance. Two trim schemes— a retro 1980 World Championship tribute and a modern “XA scheme” — provide unique style options. With hollow wings reinforced by wood and carbon, this airplane is not only visually stunning but also robust and aerodynamic for extreme maneuvers.
Night Version LED Lighting
The Night Version of the Laser 200 features internally mounted and pre-installed LEDs that illuminate the airplane from within for stunning night flights. The LEDs can be switched on and off via your transmitter** and are powered by an independent 3S LiPo battery through the 6S JST-XH balance tab on the LED controller. The servo lead of the LED controller is left unplugged by default, but if it's not connected to the Aura 8 or a receiver, it will automatically turn on when powered, making night flying possible even with a basic eight-channel transmitter or receiver.
Features:
- DualSky 4120C-8 500KV ECO Series brushless motor
- HobbyWing 80A ESC with external 7A BEC
- Aura 8 Advanced Flight Control System pre-installed
- Flex DS38HV digital high-speed metal gear servos
- Iconic Laser 200 lines with extra scale details
- Lightweight 3.5mm aluminum landing gear
- Removable battery tray for easy access
- Two available trim schemes
- Stab spotlights for night flying (night version only)
- Ball link connections on all control surfaces
Includes:
- (1) Laser 200 60E airframe
- (1) DualSky 4120C-8 500KV ECO Series motor
- (1) HobbyWing 80A ESC with external 7A BEC & EC5 Connector
- (1) Aura 8 Advanced Flight Control System
- (4) Flex DS38HV digital servos
- (1) Flex 16 x 6” propeller
- (1) Pre-Installed LED Light Kit
- (1) Product Manual
Needed To Complete:
- (1) 8+ Channel Computer Radio
- (1) 6S 3500–5200mAh 40C+ LiPo battery with EC5 (22.2V)
- (1) Spektrum SPM4651T or Futaba R3001SB receiver
- (1) Compatible Battery Charger
Specifications:
| Length |
60in (1524mm) |
| Wingspan |
59.5in (1511mm) |
| Weight |
7lb 0oz (3.18kg) |
| Material |
EPO Foam |
| Power Source |
Electric |
| Input Voltage |
6S 2800-5200mAh LiPo (22.2V) |
| Motor |
Brushless (500kV) |
| Connector |
EC5 |
| Assembly Level |
PNP** |
*Tech Note: Plug-N-Play aircraft come equipped with some on-board electronics and still require a compatible transmitter for operation. Please check the Needed to Complete to make sure you have everything you need to get up in the air!
**Tech Note: In order to control the LEDs from your transmitter, you must use a standard receiver that is capable of 9+ channels and keeps the servo ports active when using a digital data stream such as S.Bus. Additionally, it is required to use an independent 3S LiPo battery to power the LEDs. Failure to do so can damage your flight batteries.
Manuals:
User Manual
