E-flite Ultra-Micro UMX Extra 300 3D Bind-N-Fly 3D Airplane

This is the E-flite UMX Extra 300 3D. The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams), with battery installed, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible.

The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film. The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision. Optional Side Force Generators are also included. These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight. They improve tracking during precision aerobatics too.

The UMX™ Extra 300 3D BNF comes completely assembled, with a punchy 8.5mm coreless brushed motor and Spektrum™ AR6400L Ultra Micro DSM2 Receiver/ESC that has been factory installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included. For best performance, a DSM2 aircraft transmitter with dual rates and expo is recommended.

Features:

• An ultra micro that's ideal for indoor 3D flight
• Completely built and flight ready—just bind to any DSM2™ aircraft transmitter with dual rates and expo
• Includes a Li-Po flight battery and DC Li-Po charger
• Small and light enough for experienced pilots to fly almost anywhere indoors

Specifications:

• Wingspan: 16.8 in (427mm)
• Overall Length: 19.4 in (494mm)
• Wing Area: 74 sq in (4.8 sq dm)
• Flying Weight: 1.2 oz (32.5g)
• Motor Size: 8.5mm Coreless Brushed
• Trim Scheme Colors: Red, Grey, Clear, Black
• Prop Size: 130mm x 70mm
• Recommended Battery: 3.7V 1-Cell 150mAh LiPo
• Approx. Flying Duration: 6-8 minutes
• Scale: Ultra Micro
• Minimum Age Recommendation: 14 years
• Experience Level: Advanced
• Recommended Environment: Indoor/Outdoor
• Assembly Time: Less than 1 Hour
• Is Assembly Required: No

Needed To Complete:

• A 4+ Channel DSM2 compatible Transmitter. Note: A programmable transmitter capable of dual rates and exponential is highly recommended.

This product was added to our catalog on January 4, 2011