This is the E-flite Park 480 Brushless Outrunner Motor, 910 kV. The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers 20- to 30-ounces (565- to 850-grams), scale park flyers 25- to 35-ounces (710- to 990-grams), or models requiring up to 250 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF and Mini Funtana 3D ARF, and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF.
Features- Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
- Ideal for scale park flyers 25–35 oz (710–990 g)
- Ideal for models requiring up to 250 watts of power
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- External rotor design, 4mm shaft can easily be reversed for alternative motor installations
- Slotted 12-pole outrunner design
- Quiet, lightweight operation
- High quality construction with ball bearings and hardened steel shaft
Specifications:Type: Brushless Outrunner
Size: Park Flyer
Bearings or Bushings: Ball Bearings
Wire Gauge: 16
Recommended Prop Range: 10x7 to 12x6
Voltage: 7.2 to 12
RPM/Volt (Kv): 910
Resistance (Ri): .08 ohms
Idle Current (Io): .85A @8V
Continuous Current: 20A
Maximum Burst Current: 25A (15 sec)
Cells: 6 - 10 Ni-Cd/Ni-Mh or 2 - 3S Li-Po
Speed Control: 20A - 35A Brushless
Weight: 87g (3.1 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 4mm (.16 in)
Overall Length: 33mm (1.30 in)
This product was added to our catalog on December 5, 2007
