The E-flite Eratix 3D Flat Foamy Bind-N-Fly Basic Electric Airplane with AS3X and SAFE is designed to offer aggressive aerobatic performance while also being a smooth sport and slow-flying model. This sporty airplane bolts/snaps together and can be ready to fly in less time than it takes to charge a battery. Its lightweight yet extremely durable EPP airframe is mostly factory-assembled and includes a factory-installed 3S-compatible power system. The Eratix 3D is small and lightweight enough to be flown indoors in gymnasiums and other similar spaces or outdoors in yards, parks, and sports fields, making it a versatile addition to the hangar for a wide variety of pilots!
Features:
- The easiest to buy, assemble and fly flat foamy model yet – capable of slow cruising, sport flying, basic and all-out 3D aerobatics
- Specially tuned brushless motor that’s factory-installed and ready for use with popular 3S 600–850mAh batteries
- 15-amp Spektrum Avian™ Smart ESC provides real-time battery voltage, current, RPM, and other data via compatible receivers and transmitters
- Three factory-installed digital servos and linkages, including a metal-geared aileron servo
- Fast and easy assembly, unlike similar class models – no glue or tape required
Wingspan: 34" (864 mm)
Length: 35.69" (907 mm)
Weight: 13.3oz (376g)
Material: Foam
Propeller Size: 9x4.6SF Electric
Power Type: Electric
Motor Size: Brushless - 2405-1200KV 14-Pole
Connector Type: IC2
Completion Level: Bind-N-Fly
NOTE: Bind-&-Fly aircraft come equipped with all onboard electronics and still require a compatible transmitter for operation. Please check the Needed to Complete to make sure you have everything you need to get up in the air!
Includes:
- (1) E-flite Eratix 3D FF 860mm with:
- (1) Spektrum Avian 15A Brushless Smart ESC (installed)
- (1) Spektrum Avian Brushless Outrunner Motor (installed)
- (3) Spektrum Sub-Micro Digital Servos (installed)
- (1) Spektrum AR630 Receiver (installed)
- (1) Product Manual
- (1) Full-range 5+ channel Spektrum DSMX/DSM2 compatible transmitter
- (1) 3S 11.1V 600–850mAh LiPo with IC2 Connector (or JST-RCY connector plus a suitable IC2 to JST-RCY adapter)
- (1) Compatible LiPo Charger
This product was added to our catalog on December 8, 2022
I had a terrible experience that the Safe was wrongly configured.
Upside down.
As it’s an BNF, I couldn’t reset the RX and re-program via my ix20.
I’m getting help with AMain to see my options to have this fixed.
No regrets and will definitely buy again if this one gets thrashed too much to fly anymore. Well built and perhaps just get a spare prop and more o rings just in case!