The E-flite CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time.
Features- Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
- Light wing loading and large control surfaces for astonishing freestyle and 3D capability
- 90% factory-built and covered in genuine UltraCote
- Carbon fiber pushrods
- All hardware and an Outrunner Stick Mount are included
- Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors
Specifications:Wing Span: 35.5 in (900mm)
Overall Length: 35.5 in (900mm)
Wing Area: 425 sq in (27.5 sq dm)
Flying Weight: 15.5-17 oz (440-480g)
Motor Size: Park 450 or Park 400
Radio: 6 channels (for proper mixing)
Servos: 4 sub-micro
CG (center of gravity): 4-3/4" (120mm) back measured from the center of the leading edge of the wing next to the fuselage
Prop Size: 11x3.8 Slow Flyer
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Poly
Control Throw (Ailerons): 1.25" (32mm) with 20% Expo on Low or 1.75" (45mm) with 43% Expo on High Up/Down
Control Throw (Elevator): 2" (50mm) with 20% Expo on Low or 3" (75mm) with 49% Expo on High Up/Down
Control Throw (Rudder): 3" (75mm) Low & High Left/Right
Scale: Park Flyer
Approx. Assembly Time: 3-4 hours
This product was added to our catalog on January 21, 2008
