The D-Links Capra Combo Link Kit includes delrin upper and "Chubby" lower links to give you a best of both worlds balance for your 318mm wheelbase Capra. The heavy weight lower links provide great weight down low on the axles, while the delrin uppers help to keep the overall weight of the truck low. The high clearance rear links offers a good flat area off the skid for a better break over angle for better crawling.
NOTE: Photo of assembled links is for illustrative purposes only. The links you will receive are unassembled and require assembly.
Features:
- Delrin (1/4"): Lightest option and slides the best over rocks, logs, and other trail debris.
- Chubbies (5/16"): Heaviest weight. It's made of brass rod and is very stout. This is great for that massive down low weight that crawlers often need to stay planted to the ground.
- High Clearance Option: The high clearance option gives you a bend on the links to help clear obstacles. You may find on certain vehicles this will leave your drive shaft more exposed to damage. Some folks will put spacers between the link and rod end to clock the driveshaft upwards out of the way.
- Rod Ends: D-links uses the Traxxas revo rod ends (TRA5347). They have proven to be reliable, long lasting and easily replaced when needed.
- Warranty: D-Links are made in the U.S.A. All D-Links are lifetime guaranteed. Send the broken link to D-Links and receive a brand new one. D-Links does not guarantee the rod ends as they are a wear item.
NOTE: Steering tie rod and drag links are not included.
This product was added to our catalog on January 22, 2021
I am extremely happy with the links. I have one thing to say. If you’re adding aftermarket parts to any RC crawler there will be a little extra labor. You can use the factory Capra ends which work perfect however are not the best ball ends as they can strip if you over tighten them. Now like any aftermarket part you might have to play with different ball ends. These have your typical Traxxas/Vanquish ball ends that have proven to be very strong. They are your typical ends that come with 98 percent of the links out there. Now I did not use them because I used angled ball ends with lengthened ends on the lower links to change the angle on my axles. Also I’m running front and rear SUPER SHAFTY steering axles. These Brass links ad a lot of lower weight which makes my crawler extremely stable. Also I’m getting 100 percent articulation with no rubbing or hitting.
THIS IS NOT A HIGH CLEARANCE LINK Set!!! ONLY HIGH CLEARANCE REAR! Do not recommend for the capra. The traxxas link ends do no work with capra lower links either. All around failure.
