Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone w/SAFE

Read Reviews
Write a Review
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
Price: $99.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons

This is the Blade Inductrix FPV BNF Ultra Micro Electric Drone with an included battery and charger. The perfect beginner FPV drone designed for indoor flying in even the smallest of places, the Blade® Inductrix® drone is an ultra-micro marvel. Four specially tuned Electric Ducted Fan rotor systems give this modern quad the appeal of a jet. As a result, performance feels incredibly smooth with far less noise than a conventional propeller rotor system. Durable rotor housings inherently prevent damage whether it’s bumped into walls or falls into the grass. Brilliant LED orientation lights and a sleek body design help keep you going in the right direction. Innovative SAFE® technology with self-leveling makes staying in control easy, even if it’s your first flight.

 

Features:

  • Intuitive flight modes that make flying simple
  • Fully integrated FPV flight camera on 5.8GHz
  • Quiet EDF power system
  • Improved motors for better response
  • Durable rotor housings prevent damage
  • Lightweight and fully-assembled with no building required
  • E-flite® 200mAh 45C Li-Po flight battery and USB charger (included)

Features: 

  • SAFE Equipped: SAFE (Sensor Assisted Flight Envelope) technology is a revolutionary electronic flight envelope protection system. This technology allows anyone to pick up the transmitter, put on the goggles and be successful flying FPV for the very first time. Its newly improved Stability mode allows for fast forward flight with the added weight of the FPV system. It prevents over controlling the aircraft and gives a confident feeling when maneuvering through tight spaces. The Agility mode has also been tuned for the high output motors and weight of the FPV system on board. It allows for aggressive forward flight and even some mild aerobatics.
  • FPV Equipped: The Inductrix FPV is equipped with a 25mW video transmitter capable of transmitter on Fat Shark channels 1 through 7 and all Raceband channels so you can race several pilots at once. You can select channels from the easy to use button atop the body of the Inductrix. The camera is very lightweight and perfectly protected in the body housing. The antenna we’ve chosen for video transmission is a dipole and designed with durability in mind. Video range of the Inductrix FPV is nearly 100 yards line of sight and more than adequate to fly in any large building or home.
  • High Performance Motors: We’ve tweaked the flight controller to better control in stability mode by allowing pitch to remain as the user demands even if throttle is full and agility mode is more crisp and controllable too!
  • 200 mAh Battery: Included is a large capacity 200 mAh battery so that you can fly upwards of 4 minutes.
  • LED Lighting: With brilliant white and red LED lighting illuminating each Inductrix FPV, it’s easy to follow friends while flying together or even see if the battery is getting low when they begin to blink. The lights are mounted inside each frame so they too will be protected in a crash.
  • Quiet Ducted Fans: Each rotor is housed in a true duct and is extremely quiet during flight. The benefit of using ducted fans instead of propellers is they fully protect the fans in a crash and prevents the Inductrix from causing any damage to walls and is safe enough to be caught by hand!

Specifications:
Type: Multi-Rotor
Gross Weight: 24g
Length: 83mm
Kit/ARF/RTF: BNF
Experience Level: Beginner
Recommended Environment: Indoor
Is Assembly Required: No

Needed to Complete:

  • 4-Channel DSMX 2.4GHz Transmitter
  • 5.8GHz compatible FPV headset or FPV monitor

This product was added to our catalog on September 28, 2016

Edison Wong
Monday, Oct 31 2016 (about 8 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
It's an excellent and fairly durable flyer! Finally broke a motor support after flying into many things. The power connection could be improved however. Was getting less that 2min flights with the stock battery. LVC would kick in at 1:40+ but upon charging, the battery voltage reading states 3.9V. Finally managed to solve this by changing the power lead to thicker wires. Take care of the polarity when attempting however. Camera and power plugs have reversed polarity on mine. After the mod, batteries come back at 3.7+V and flight times are back up to 3min+.

Blade, do consider using thicker gauge wires to eradicate this issue. Thanks.
2 customers found this review helpful.
Anonymous
Thursday, Mar 9 2017 (about 7 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
I've had this a month and it is a blast. I use Teleporter v4 goggles and I cannot stop flying this thing. It is very stable but a bit under powered. Flight times are pretty short at 2 1/2 minutes with the stock battery. I purchased the Tattu 220mah batteries and they give about a minute more flight time. Get a couple of packs of batteries and you'll need a charger that can charge multiple batteries because you will want to fly around the house all day long. My Inductrix went on a bit of a diet and I trimmed off 1.15 grams. it has much better punch out now. I did this without altering the look of it too much. I trimmed the canopy and removed the long oval at the top that changes the tx freq. not just to save weight but to stop it from changing channels if I bump the ceiling or crash and land upside down. I hard-wired the camera to the power lead and I removed all of the rubber bands that hold the motor wires. I also removed two blades from each prop. That mod also added a bit more punch. I tested four bladed and two bladed props back to back and the modified props work better. They also give an additional 20 seconds of flight. The range is very good. I can sit on my couch in my living room and fly it out the door and around the front yard with minimal break up. I've crashed it dozens of times without a single broken part. I guess I've been lucky but I did buy a spare frame just in case. The Eachine props work very well at half of the price of the stock ones. I must repeat my prior statement about buying two packs of batteries(at least). Great little piece of technology. Five stars when they get the flight time improved.


Update 6-8-2017
I replaced the original flight board with this "Pro" version. It weighs about .5 gm more than the old board(probably because of the mini usb plug) and has the motor rotations changed. If you do this to your regular Inductrix fpv look up the Pro manual online for proper installation.
It works just as well as the old board and is betaflight ready. You don't have to connect to betaflight to use this but if you do you will be in geek heaven. You can change almost everything. It seems to be a bit more efficient and my flight times have improved by about 10 seconds(averaged over 10 flights)despite the additional weight. I use 19600kv motors and this board seems to extract more power from them and the drone's flight appears smoother too. I don't know if I would recommend this as it costs half of the price of a complete Inductrix Fpv and aftermarket replacements(also betaflight ready)sell for less than 25 bucks, however, if you like to tinker with your settings, this is for you.
1 customer found this review helpful.
Six7One
Sunday, Oct 30 2016 (about 8 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
FUN!<------>
Bound to a DX6 and connected my fatshark goggles. Works great, video is clean and crisp indoors.
<------>
Setup your radio with a more aggressive throttle curve. 0-40-75-95-100 works well for me. Set roll and pitch to 60 and yaw to 70 to smooth it out a little if just figuring it out.
<------>
Major bummer...
Battery life stinks. Even just hovering, I have not seen a flight longer than 2.25 minutes in 75 degree temps, indoors. Low-voltage detection kicks in and a few seconds later, drops from flight. Each Eflite 200mah pack has 7 cycles, with no improvement.
2 of 3 customers found this review helpful.
Stephen Brenner
Verified Owner
Monday, May 8 2017 (about 7 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
A very good indoor and outdoor little to no wind flier. A great way to get your feet wet in fpv flying. There are some cheaper alternatives, but since they fixed all the bugs this is an easy purchase if you want to whoop it up. Pick up a set of fpv goggles and fly the best way, fpv. The only real upgrade not built in is if you want to add the 2.0 battery connector. I still have not done so and I am enjoying this immensely. I would buy another if I needed one.
Anonymous
Friday, Feb 10 2017 (about 7 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
This little quad is great for the price, but it has it's drawbacks. Right out of the box the props on mine would not hold on to the prop shafts strongly enough to be flown, meaning that when I applied throttle the props would just fly off a and leave the quad sitting on the ground. So no flying the first day... I went back to Hobby Town and bought different props, which work great. However, within the first couple of flights a motor burnt out (it got under 10 min of use) so back to Hobby Town again for the third time. Now with new props and motors it flies great! I guess my point is that if you want it to work like it should, you may need to buy replacement parts even if it's brand new.
Lyle Altig
Verified Owner
Friday, Nov 18 2016 (about 8 years ago)
Blade Inductrix FPV BNF Ultra Micro Electric Quadcopter Drone
Excellent little quad getting about 3 minutes and 20 seconds out of it with A battery from tinywhoop.com
View all reviews