Avid RC Aluminum Steering Bellcrank Set

This is an optional Avid RC Aluminum Steering Bellcrank Set, and is intended for use with the Team Associated B4, B4.1, T4, T4.1 and SC10 1/10 scale vehicles. These Aluminum steering bellcranks are machined from billet 6061-T6 aluminum alloy, black anodized, and laser etched for a premium look. Each package includes 1 left and 1 right bellcrank which replace the plastic servo saver and bellcrank on your Team Associated ride.

These aluminum bellcranks eliminate flex in the steering system for maximum steering feel. They also eliminate the plastic servo saver which can fail and cause DNFs. According to the Xtreme RC Cars, the single biggest improvement in lap times to a short course RTR was to lock the servo saver. Flex in the steering system is one of your biggest enemies, especially in heavier short course trucks which have larger, heavier tires.

Specifications:
Material: Billet 6061-T6
Weight: 10g (stock B4 bellcranks 7g)

Note: These parts eliminate the servo saver and should only be used in conjunction with a high quality metal gear steering servo.

Build Tip: Assemble the steering rack screws with blue thread lock. Also, if you tighten down the 2 Button Head screws to hold the steering rack and you feel a bind in the movement, it could be that the steel pivot bushings are too short. Slide a thin motor shim over the screw before installation and this will prevent the screw from clamping onto the rack and causing drag. 

This product was added to our catalog on October 23, 2012