Beginner-Friendly & Easy to Fly Aircraft
The Arrows Hobby Prodigy Ready-to-Fly (RTF) Electric Airplane is designed to offer a seamless flying experience for beginner pilots while providing enough excitement for seasoned flyers. Featuring quick assembly and stable flight control, this model is built with ultralight and durable EPO foam. It has a large wing area and high-winged configuration that ensures low wing-loading and extraordinary lift, even at slow speeds. The pusher propeller design protects the propeller during landings and also makes the Prodigy an excellent platform for FPV setups.
About the Prodigy RTF Airplane
Easy Assembly and Transport
The Prodigy is designed with convenience in mind. Its quick-release and quick-install design allow pilots to get the airplane flying within minutes of unpacking the included battery. This feature is particularly beneficial for pilots who prefer to spend more time flying and less time assembling. Additionally, the lightweight and easy-to-transport design makes it simple to take the Prodigy to various flying locations without hassle.
Durable and Efficient Design
Constructed from ultra-lightweight and tough EPO foam, the Prodigy is built to withstand the rigors of frequent use. The robust material ensures that the airplane can handle minor impacts and rough landings, which is ideal for novice pilots still honing their skills. The pusher propeller design not only protects the propeller but also facilitates First Person View (FPV) setups, enhancing the versatility of this model.
Impressive Power and Flight Time
The Prodigy features a high-performance power configuration that includes a 2212-1500kV brushless motor and a 20A ESC capable of providing ample power for both leisurely glides and rapid ascents. With the included 3S 1300mAh 25C battery, pilots can enjoy up to fifteen minutes of flight time, especially when gliding. This extended flight time allows for longer practice sessions and more fun!
Features:
- Simple, lightweight, and easy to transport design
- Pusher propeller design facilitates FPV usage
- Robust and durable EPO foam material
- Quick-release and quick-install design
- Up to fifteen minutes of flight time
- Equipped with a 2212-1500kV motor and a 20A ESC
- One-piece horizontal stabilizer
- Stable flight control
- Vector Gyro with three flight modes
- Suitable for both beginner and advanced pilots
Includes:
- (1) Factory-Assembled Front Fuselage with Decals
- (1) Factory-Assembled Rear Fuselage with Decals
- (1) Main Wing with Decals
- (1) Horizontal Stabilizer
- (1) Screw Set
- (1) Wing Spar
- (1) Pushrod
- (1) 3S 11.1V 1300mAh 25C LiPo battery
- (1) USB Battery Charger
- (1) Pre-installed Vector Gyro
- (1) Pre-installed Brushless 2212-1500kV Motor
- (1) Pre-installed 20A ESC with XT60 Connector
- (4) Pre-installed 9g Servos
- Product Manual
Needed To Complete:
- (4) AA Batteries for Transmitter
Specifications:
| Length |
42.9in (1089mm) |
| Wingspan |
55in (1400mm) |
| Weight |
33.51oz (950g) |
| Material |
EPO |
| Motor |
Brushless 2212 (1500kV) |
| Input Voltage |
3S LiPo (11.1V) |
| Assembly Level |
RTF* |
*Tech Note: Ready-to-Fly aircraft come equipped with all electronics and included the needed transmitter for use. Please check the Needed to Complete below to make sure you have everything you need to get up in the air!
Manuals:
User Manual
Vector Stabilization Manual
Radio Manual
