This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit. This kit includes one Align 450MX 3400kV motor, RCE-BL35X Brushless ESC, three Align DS410 digital servos, one DS520 digital servo, 325D carbon fiber rotor blades, and the awesome Align 3GX flybarless system.
T-Rex 450 Pro V2 Flybarless 3GX Combo Features:
- Incorporating the next generation 3GX flybarless system, with enhanced pirouetting compensating routine, and optimized stability for smaller helicopters. Together these features enable smaller helicopters to have control feel that resembles its flybar counterpart.
- Improved low wind resistance specialized flybarless rotor head assembly, with reduced distance between rotor head and frame, effectively lowering the CG for better 3D performance.
- Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
- Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
- Brand new MX series high efficiency brushless motor, with heat sink style casing and built in cooling fan, effectively increase heat dissipation during operation, improving power output.
- Integrated battery / ESC mount, allowing adjustment based on battery dimension for optimal CG of the helicopter. Additionally the number of screws has been reduced to minimize assembly and maintenance time.
- High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
- Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
- Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
- New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Length: 635mm
Height: 230mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 15T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10:4.24
Weight (w/no power system): 530g
Flying Weight: Approx. 640gg
3GX Programmable Flybarless System Features:
- Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create an immediate impact on any enthusiasts.
- 3GX is currently the smallest and lightest flybarless system on the market and features two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
- Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
- Graphic illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
- Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
- With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutter.
- A library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
- Three levels of flight mode are available on the 3GX to provide different feels for beginning and advanced pilots.
- Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
- 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to the last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
- Suitable for helicopters of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
- 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
- With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
- 3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
- Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm
Weight: 11g
Maximum working voltage: 8.5V
T-Rex 450 Pro V2 3GX Super Combo Includes:
- (1) T-REX 450 PRO 3GX Kit
- (1) 3GX Flybarless System
- (1) 325D 3G Carbon blade set
- (1) RCE-BL35X 35A Brushless ESC
- (1) 450MX Brushless motor(3400KV)
- (3) DS410M (Metal Gear) Digitalservo
- (1) DS520 Digital servo
- Transmitter (6-channel or more, helicopter system)
- Receiver (6-channel or more)
- Pitch gauge
- 11.1V 3S Li-Po 2000~2300mAh battery
This product was added to our catalog on August 26, 2011
Jason
Verified Owner
Thursday, May 2 2013 (about 11 years ago)
Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit w/Motor, Servos & CF Blades
It's been about 8 or so years since I've flown helis. I've always been more interested in planes but came back for the challenge only r/c helis can provide. Things have come a long way, this kit was very easy to assemble requiring about 3hrs to assemble. I upgraded the 3GX system to V3.1 right away and followed the set-up procedures outlined in the manual. This heil flies amazing, very smooth, quiet, and responsive. I haven't played with the 3GX settings yet as the default set up is working great for me, but the number of tuning options it offers are amazing. I would highly recommend this heli to anyone!
Anonymous
Tuesday, Oct 23 2012 (about 12 years ago)
Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit w/Motor, Servos & CF Blades
I built this kit in just a few short nights.
Really amazing how far RC Helicopter kits have come.
Really amazing how far RC Helicopter kits have come.
Anonymous
Thursday, Dec 29 2011 (about 12 years ago)
Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit w/Motor, Servos & CF Blades
This kit is a piece of cake to assemble compared to the past t rex's. Heli is rock solid as long as you follow directions to the "T". Anyway assembly took me less than 3 hours to put together. Setup takes a little while, but once it is dialed in it is great. I am new to flybarless and the 3gx I felt was great for my flybarless first choice : ). Buy this help you will not be dissappointed. Currently building a 550e for Aerial photography and FUN! If your an Align fan you will not be disappointed.
Anonymous
Verified Owner
Sunday, Dec 11 2011 (about 12 years ago)
Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit w/Motor, Servos & CF Blades
coming from a blade 450 this kit is fantastic, just about everything fit perfectly and all parts were free of sharp edges and just felt solid...
i ended up ditching the 3gx and the 410s after reading alot of good and bad reviews, and ended up with a microbeast and hitec 5065mgs along with a castle ice lite 50
just maidened her today, and she has so much power its unreal
running a governed headspeed of 2800
i ended up ditching the 3gx and the 410s after reading alot of good and bad reviews, and ended up with a microbeast and hitec 5065mgs along with a castle ice lite 50
just maidened her today, and she has so much power its unreal
running a governed headspeed of 2800
Jason Storti
Verified Owner
Thursday, Sep 15 2011 (about 13 years ago)
Align T-Rex 450 Pro V2 3GX Flybarless Super Combo Helicopter Kit w/Motor, Servos & CF Blades
This is a really nice kit, they've made alot of improvements since the earlier days of the 450. Flybarless not withstanding, the head, frames and tail assembly are all new and many things have been simplified making assembly and maintenance alot easier. I used to dread taking a servo out of my 450 or re-doing the head after a crash, it's much easier to work on now. 2 Thumbs up!