This is an Align 22.2V - 6,000mAh, 30C Li-Poly Battery Pack. This battery was developed for the Align M480L and M690L multicopters. The extreme high capacity of this battery is catered specifically to applications that require extended flight times.
Specifications:
Nominal Voltage: 22.2V
Dimension: 160x50x50mm
Weight: 886g
Max Continuous Discharge: 30C
Capacity: 10000mAh
Configuration: 6S1P
Max. temperature: 80°C
Wh: 133.2
Connector: XT60
NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles. (The cycle life and efficiency will reduce due to high current, high temperature and over-discharge). Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.
Do not leave the charger is operating unattended as it may cause a fire. Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. Normal operating temperature is approx. 40-65°C (within 80% of rated discharge). If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.
This product was added to our catalog on January 5, 2015
