Align 2S1P LiPo Receiver Battery 30C (7.4V/2200mAh)

This is an Align 7.4V - 2200mAh, 30C Li-Poly Receiver Battery. This receiver battery is an excellent choice for 600 to 800 class helicopter receiver pack applications. 

Specifications:
Output: 7.4V(2S1P)2200mAh
Rating: 30C continuous, 40C burst
Dimension: 34x105x15mm
Weight: 107g

Note: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.

Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.  

This product was added to our catalog on May 7, 2013