EcoPower "Electron 610 AC" LiPo/LiFe/NiMH AC/DC Battery Charger (6S/10A/200W)

This is the EcoPower "Electron 65 AC" LiPo/LiFe/NiMH AC/DC Battery Charger. The EcoPower "Electron 610 AC" is a computer controlled, single port balance charger that features a built in power supply, combined with a high performance microprocessor and specialized operating software that allows you to reliably charge batteries of varying chemistry's and cell counts. Multiple charge modes, a 6S cell limit, 10A/200W power delivery, five user programmable charge profiles, and an internal lithium cell balancer are only a few of the features that make this charger a powerful and flexible tool for any RC enthusiast. So stop beating yourself with cheap chargers, and buy from a trusted source that proves itself time after time with outstanding customer service and quality products at affordable prices! 

Click Here To Download Product Manual

Click Here For Warranty Information

NOTE: To prevent overheating, 6S Lithium packs should not be charged at rates higher than 7.5 amps. 

Features:

• Internal 110/220V AC power supply
• Optimized operating software
• Built in lithium battery cell balancer
• Balance discharge capability
• LiPo/LiFe/LiIon compatible
• Normal, fast and storage charge modes
• Automatic error detection and shut off
• Delta peak voltage detection
• Stores up to five charge profiles

Specifications:

• Operating Voltage Range: 
• AC: 100-240V / 50-60 Hz
• DC: 10-18V / 16A (Max: 220W)
• Circuit Power:
• Charging (Max): 200W
• Discharging (Max): 25W
• Charge Current Range: 0.1 - 10.0A
• Discharge Current: 0.1 - 5.0A
• LiPo Balancing Current Drain: 200mAh/cell
• Lithium Battery Cell Count: 1 - 6 Cells
• NiCd/NiMH Battery Cell Count: 1 - 18 cells
• Pb Battery Voltage: 2 - 24V
• Weight: 1500g
• Dimensions: 143x149x42mm

IMPORTANT:
1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a Li-Poly charging bag
5) YOU MUST use a Li-Poly specific charger to charge a Li-Poly pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ & UNDERSTAND the instructions carefully before operating this charger

Includes:

• (1) EcoPower Electron 610 AC charger
• (1) 4mm Banana plug to male T-Style charge lead
• (1) Female T-Style to glow ignitor charge lead
• (1) Female T-Style to JST charge lead
• (1) Female T-Style to alligator clip charge lead
• (1) Female T-Style to Futaba charge lead
• (1) 12V Adapter cable
• (1) AC cord

This product was added to our catalog on March 14, 2013