This is an optional Kyosho 13 Tooth Light Weight Clutch Bell. This clutch bell features large cut-out vents reducing weight, lowering rotation mass and allowing airflow to the clutch assembly. This bell is 2-4 grams lighter than stock.
This product was added to our catalog on February 13, 2014
Kyosho 0.95mm 3-Shoe Clutch Springs. These optional three-shoe ...
clutch style (0.95mm) springs are intended for Inferno MP7.5 and Inferno MP777 platforms to provide racers with an extra tuning option! The bigger the spring, the stiffer it is and the later ...
Kyosho 1.1mm 3-Shoe Clutch Springs. These optional three-shoe ...
style 1.1mm clutch springs are intended for Inferno MP7.5 and Inferno MP777 platforms to provide racers with an extra tuning option! The bigger the spring, the stiffer it is and the later ...
Kyosho 3x5x10.3mm Crank Shaft Collar. These are the B ...
the B version collars used on the crankshaft, during clutch bearing and gear assembly. These also allow you to use standard 5x10x4mm clutch bearings and eliminate the need for needle bearings on the GT2. ...
three shoe style clutch shoes for Kyosho buggies, and fits the Inferno MP7.5 and Inferno MP777 family of buggies. These are the stock clutch shoes that come with the Kanai and Special ...
This is a replacement Kyosho KE-25 Engine Mount, ...
and is intended for use with the Kyosho Mad Force Kruiser monster truck with the KE-25 SG engine. This mount can also be used with previous generation MadForce monster trucks and will ...